HexEzCan
Showing all 24 results
-
Batteries and Electricals
BMW R1200 / R1250 Hex EzCan Accessory Manager (Gen 2)
BMW R1200 / R1250 Hex EzCan Accessory Manager (Gen 2)
This accessory manager for the BMW series lets you add and configure accessories with ease and without cutting any wires. It’s simple and easy to fit additional lights, an air horn, accessories and emergency brake lights that make the bike safer to ride. Key features Waterproof and dust proof One switch manages everything Integrates additional safety features Does not void warranty Plugs directly into CAN-Bus (saves time) Unobtrusive – fits perfectly under the seat Easy configuration of software via USB (Mac and Windows PC) Four individually fused channels Resources FAQ Downloading the software Software The HEX ezCAN software is available for both Mac and Windows PC and is used via a micro USB cable, which is included in the package. Use Channel Mapping to select your preferred configuration. The Configuration window then lets you customise the behaviour of your accessories according to CAN-Bus inputs, for example setting up an emergency brake light to flash when the ezCAN detects harsh deceleration or the LEDs to flash when the air horn is activated. Accessory/Ignition supply can be set to remain on for a specific time after the ignition is turned off. Net Quantity 1N x ezCAN Device 1N x Micro USB Cable 2N x Velcro Strips 2N x Blanking Plugs 4N x Cable Ties 4N x Two-wire stub connectors (Orange) 4N x Terminal wires (Orange) 4N x Blanking seals
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: HK-H3-EZL-002 -
Lighting Accessories
BMW R1300 Hex EzCan Accessory Manager (Gen 2)
BMW R1300 Hex EzCan Accessory Manager (Gen 2)
This accessory manager for the BMW series lets you add and configure accessories with ease and without cutting any wires. It’s simple and easy to fit additional lights, an air horn, accessories and emergency brake lights that make the bike safer to ride. Adjust all your electronic accessories from the factory BMW controls. Auxiliary lights Heated clothing Power your SAT Nav and/or smartphone Auxiliary rear brake lights Upgrade horn Key features Waterproof and dust proof One switch manages everything Integrates additional safety features Does not void warranty Plugs directly into CAN-Bus (saves time) Unobtrusive – fits perfectly under the seat Easy configuration of software via USB (Mac and Windows PC) Four individually fused channels Resources FAQ Downloading the software / INSTALLATION Software The HEX ezCAN software is available for both Mac and Windows PC and is used via a micro USB cable, which is included in the package. Use Channel Mapping to select your preferred configuration. The Configuration window then lets you customise the behaviour of your accessories according to CAN-Bus inputs, for example setting up an emergency brake light to flash when the ezCAN detects harsh deceleration or the LEDs to flash when the air horn is activated. Accessory/Ignition supply can be set to remain on for a specific time after the ignition is turned off. Net Quantity 1N x HEX ezCAN Mojave Device 1N x Micro USB Cable 4N Nx 2-wire Male stubs 4N x 1-wire terminated. 4N x Blanking seals 3N x Blanking Plugs 20N x Cable Ties 1N x Adventure Sleeve on the device
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: H3-EZL-004 -
Batteries and Electricals
BMW S, F &K Hex EzCan Accessory Manager (Gen 2)
BMW S, F &K Hex EzCan Accessory Manager (Gen 2)
BMW Hex EzCan Accessory Manager S1000XR / F750/ F850/ K1600 / F900XR (Not R) This accessory manager for the BMW series lets you add and configure accessories with ease and without cutting any wires. It’s simple and easy to fit additional lights, an air horn, accessories and emergency brake lights that make the bike safer to ride. Key features Waterproof and dust proof One switch manages everything Integrates additional safety features Does not void warranty Plugs directly into CAN-Bus (saves time) Unobtrusive – fits perfectly under the seat Easy configuration of software via USB (Mac and Windows PC) Four individually fused channels Easy installation See the HEX Ez Can Youtube channel here Downloading the software Connecting the EzCan to Computer 2) Power Mapping 2) Playlist for BMW Software The HEX ezCAN software is available for both Mac and Windows PC and is used via a micro USB cable, which is included in the package. Use Channel Mapping to select your preferred configuration. The Configuration window then lets you customise the behaviour of your accessories according to CAN-Bus inputs, for example setting up an emergency brake light to flash when the ezCAN detects harsh deceleration or the LEDs to flash when the air horn is activated. Accessory/Ignition supply can be set to remain on for a specific time after the ignition is turned off. Net Quantity 1N x ezCAN Device 1N x Micro USB Cable 2N x Velcro Strips 2N x Blanking Plugs 4N x Cable Ties 4N x Two-wire stub connectors (Orange) 4N x Terminal wires (Orange) 4N x Blanking seals
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: HX-H3-EZK-002 -
Batteries and Electricals
Ducati Hex EzCan Accessory Manager
Ducati Hex EzCan Accessory Manager
The ezCAN plugs directly into your motorcycle and listens to the CAN-bus. The best plug and play solution to add accessories to your motorcycle without the need to cut any wires that could void your warranty. This is the latest version of the ezCAN with four high power output channels which have ultimate configuration! Customise your bike and make it safer to ride. NET QUANTITY 1N x ezCAN Device 1N x Micro USB Cable 2N x Velcro Strips 2N x Blanking Plugs 4N x Cable Ties 4N x Two-wire stub connectors (Orange) 4 x Terminal wires (Orange) 4 x Blanking seals
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: H3-DUC-002 -
Batteries and Electricals
Female OBD Adaptor Cable (OBD-II GS-911 TO 10-pin adapter)
Female OBD Adaptor Cable (OBD-II GS-911 TO 10-pin adapter)
Female OBD Adaptor Cable (10-pin adapter for OBD-II GS-911) Use this when you want to use this on older models of GS since they have the 10Pin not the new OBD connectors. Adaptor for our GS-911wifi with OBD-II connector and GS-911usb Generation 2 to be used on older motorcycles featuring 10-pin diagnostic ports. Please note that the GS-911 device is not included, this is the product listing for the cable only.
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: H1-GSF-0011 -
Batteries and Electricals
GS-911 OBD Extension Cable (1M)
GS-911 OBD Extension Cable (1M)
GS-911 OBD Extension Cable (1M) Description: A 1 meter extension between the motorcycle diagnostic port and GS-911 interface.. Additional Information: WEIGHT 184g DIMENSIONS 140mm × 174mm × 30mm
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: H1-GSF-0014 -
Batteries and Electricals
Harley Davidson HEX ezCAN II Daytona
Harley Davidson HEX ezCAN II Daytona
The ezCAN plugs directly into your motorcycle and listens to the CAN-bus. The best plug-and-play solution to add accessories to your motorcycle without the need to cut any wires that could void your warranty. This is the latest version of the ezCAN with four high power output channels which have ultimate configuration! Customize your bike and make it safer to ride. This product is supplied with two diagnostic port adapter cables – individual connectors may vary from product images. Description This is the HEX ezCAN II Daytona Accessory Manager for Harley Davidson. Customize your bike and make it safer to ride. This product is supplied with two diagnostic port adapter cables – individual connectors may vary from product images. This device works on the following Harley Davidson Models: Model Support for Bikes with a 6-pin Deutsch Connector Softail- 2011 onwards Fat Boy, Fat Boy Lo, Softail Deluxe, Heritage Softail Classic, Softail Slim, Breakout Sportster- 2014 onwards Iron 883, Superlow, Superlow 1200T, 1200 Custom, Fourty Eight, Seventy-Two Dyna- 2012 onwards Low Rider, Fat Bob, Wide Glide, Switchback, Street Bob Trike- 2014 onwards Freewheeler, Tri Glide Ultra Classic Touring- 2014 onwards Road King, Street Glide, Street Glide Special, Electra Glide Ultra Classic, Electra Glide Ultra Classic Low, Ultra Limited, Ultra Limited Low, Road Glide, Road Glide Special Model Support for Bikes with a Euro 5 Connector Cruiser Softail Standard, Street Bob, Softail Slim, Low Rider S, Sport Glide, Fat Bob, Breakout, Fat Boy Touring Electra Glide Revival, Heritage Classic, Road King, Road King Special, Road Glide Special, Street Glide Special, Road Glide Limited, Ultra Limited
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: H3-HDE-002 -
Batteries and Electricals
Harley Davidson HEX ezCAN II Laconia
Harley Davidson HEX ezCAN II Laconia
The wind in your hair as you experience the freedom of the road… When you ride a Pan America you’re not just enjoying the landscape- you’re part of it! Amp up your ride with the HEX ezCAN. The ultimate plug-and-play solution to add accessories to your motorcycle without the need to cut any wires that could void your warranty. By plugging directly into your motorcycle and listening to the CAN-bus, the ezCAN integrates with your bike seamlessly making your experience of the landscape brighter, louder, and safer. This is the HEX ezCAN Laconia Accessory Manager for Harley Davidson Bikes, the latest version of the ezCAN with four high power output channels that have ultimate configuration! Customize your bike and make it safer to ride.
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: H3-HDE-004 -
Batteries and Electricals
HEX Extension wiring Kit
HEX Extension wiring Kit
The HEX ezCAN Extension Kit provides you with everything that you need to connect your front auxiliary lights, brake lights and horn to the ezCAN, with additional connectors to facilitate other accessories. The kit contains: 2 x 1.5m 3-core extension cables (typically used for 2-wire or 3wire front accessory lights) 1 x 0.5m 3-core extension cable (typically used for brake lights) 1 x 1.5m 2-core extension cable with spade connectors on one end (typically used to connect air horns or other 2-wire accessories) 3 x female MT-3 connector kit including pins and wire seals 5 x male MT-3 connector kit including pins and wire seals 5 x blanking seals (where only 2 terminals are used in a 3-wire connector) 6 x 20mm adhesive lined Heat-shrink 2 x female spade connector terminals (6.3mm) 1m Sheathing
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: H1-EXT-004 -
Batteries and Electricals
HEX ezCAN ezBUS Adapter MT Connector to 2x JWPF + 2x MT Connectors
HEX ezCAN ezBUS Adapter MT Connector to 2x JWPF + 2x MT Connectors
The HEX ezCAN: ezBUS Adapter MT Connector to 2x JWPF Connectors and 2x MT Connectors is the ideal solution for expanding your motorcycle’s accessory setup with a range of Certified HEX ezBUS Ready accessories. Designed for seamless integration, this adapter allows you to connect controllers and accessories to the HEX ezCAN’s (white) ezBUS circuit effortlessly. Equipped with a standard HEX ezCAN MT connector on one end, it plugs directly into the HEX ezCAN ezBUS (white) circuit. On the other end, two JWPF connectors and two MT connectors provide lots of secure and reliable attachment points for compatible accessories. With the HEX ezCAN Adapter, customising your ride with additional accessories has never been easier. Simply plug, connect, and ride with confidence! Key Features: Effortless Connection – Plug directly into the HEX ezCAN’s white ezBUS circuit Dual JWPF Outputs – Connect up to two Certified HEX ezBUS Ready accessories (low-power accessories) Dual MT Outputs – Connect up to two Certified HEX ezBUS Ready accessories (high-power accessories) Secure & Reliable – Engineered for durability in all riding conditionsPlug & Play – No cutting, splicing, or complicated wiring required Take full control of your motorcycle’s accessories with the HEX ezCAN Adapter – precision engineering for the perfect ride. DIMENSIONS150 × 250 × 20 mm Maximum Current: – Upto 3 Amps per JWPF connector – Upto 15 Amps per MT connector Total maximum 15 Amps for the Adapter
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: H1-EZA-015 -
Batteries and Electricals
HEX ezCAN JWPF to Euro 5 Adapter cable
HEX ezCAN JWPF to Euro 5 Adapter cable
HEX ezCAN JWPF to Euro 5 Adapter cable This adapter cable is used to connect an ezCAN to a Euro 5 diagnostic port, where the Euro 5 diagnostic port is used as the source for the CAN-bus data.
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: H1-EZS-019 -
Batteries and Electricals
HEX ezCAN OBDII JWPF Adapter cable
HEX ezCAN OBDII JWPF Adapter cable
HEX ezCAN OBDII JWPF Adapter cable This adapter cable is used to connect an ezCAN to an OBD-II port, where the OBD-II port is used as the source for the CAN-bus data.
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: H1-UEH-006 -
Lighting Accessories
HEX ezCAN protective Sleeve
HEX ezCAN protective Sleeve
The ezCAN Adventure Sleeve simply slips over the ezCAN II device providing an additional layer of protection from the elements but more importantly, allows for the ezCAN II device to easily sit or mount against the framework of the bike – thanks to it’s curved base and ergonomic design.
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: H1-EZS-009 -
Batteries and Electricals
HEX ezCAN PURE Universal Accessory Manager
HEX ezCAN PURE Universal Accessory Manager
HEX ezCAN PURE Universal Accessory Manager + an Optional Plug & Play Harness The HEX ezCAN PURE Universal Accessory Manager is a smart, software-configurable accessory controller, designed for almost any motorcycle with 12V electrics. The HEX ezCAN PURE connects to key signal trigger points — such as high beam, indicators, brake, ignition and horn — and uses these inputs to intelligently control auxiliary lights, horns, heated gear, GPS units and more. With no need to cut into your original wiring, and optional Plug- &- Play harnesses available for select models, the HEX ezCAN PURE offers a clean, seamless and highly customisable way to integrate electronic accessories into your motorcycle. Make your HEX ezCAN PURE installation quicker, cleaner, and easier with the HEX ezCAN Optional Plug & Play Harness
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: HEX ezCAN PURE + Harness -
Batteries and Electricals
HEX ezCAN replacement adaptor – BMW
HEX ezCAN replacement adaptor – BMW
The HEX ezCAN Mojave XDWA9 replacement adapter makes it simple to connect your HEX ezCAN Mojave Accessory Manager to the BMW R1300 vehicle harness. It provides a straightforward plug-in solution so your HEX ezCAN integrates neatly with your bike’s system. DIMENSIONS : 100 × 150 × 20 mm
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: H1-EZS-022 -
Batteries and Electricals
HEX ezSWITCH KIT
HEX ezSWITCH KIT
The HEX ezSWITCH is a compact, handlebar-mounted button with a built-in LED indicator. It’s a versatile smart switch that connects directly to the HEX ezBUS ‘white’ circuit, allowing you to control various accessories connected the user’s same Accessory Manager. The HEX ezSWITCH can be used on any motorcycle model that supports a HEX ezCAN, Denali CANsmart, or Lone Rider MotoCAN Accessory Manager. While most supported motorcycle models already enjoy the convenience of using their standard OE buttons—or the ‘wonder wheel’—to switch auxiliary lights on or off and adjust brightness, riders now have even more flexibility. With the addition of a smart, configurable, illuminated button, you can control your lights with ease, day or night. It’s a great option for those who want a more hands-on or custom setup, adding both style and functionality to your ride. The HEX ezSWITCH also unlocks functionality that was previously out of reach for certain motorcycles. Bikes like the KTM range, Yamaha Ténéré, and others using limited CAN-bus systems have historically lacked rider-accessible control for auxiliary lighting. With the ezSWITCH, these riders can now enable or disable their auxiliary lights, and even adjust light intensity on the fly, opening up new levels of control and riding confidence. The ezSWITCH is also easy to mount, whether on the handlebar or even the side mirror shaft, using a basic cable tie—no complicated tools or setup required! PLUS… The HEX ezSWITCH includes a single expander circuit, accessible via the white 2-pin JWPF connector. This functions like the Red, Blue, or Yellow outputs on the HEX ezCAN, but with two key differences: 2A Max Output – The circuit is protected by HEX’s proprietary fusing algorithm, but the fuse is fixed at 2A. 2-Wire Connection – Unlike the main ezCAN outputs, this does not support 3-wire lights in their 3-wire mode. While this output can be configured for any ezCAN function, it is most commonly used as a brake light output. Each ezSWITCH kit contains: 1x Handle bar switch (with integral cable) 1x ezSWITCH controller 1x 2-wire JWPF stub connector 1x MT – 1xJWPF adapter cable 3x 4.8mm x 200mm Cable ties
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: H1-EZA-010-R -
Batteries and Electricals
Honda Hex EzCan Accessory Manager (Gen 2)
Honda Hex EzCan Accessory Manager (Gen 2)
The ezCAN plugs directly into your motorcycle and listens to the CAN-bus. The best plug and play solution to add accessories to your motorcycle without the need to cut any wires that could void your warranty. This is the latest version of the ezCAN with four high power output channels which have ultimate configuration! Customise your bike and make it safer to ride. NET QUANTITY 1N x ezCAN Device 1N x Micro USB Cable 2N x Velcro Strips 2N x Blanking Plugs 4N x Cable Ties 4N x Two-wire stub connectors (Orange) 4 x Terminal wires (Orange) 4 x Blanking seals
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: H3-HND-002 -
Batteries and Electricals
Husqvarna Hex EzCan Accessory Manager (Gen 2)
Husqvarna Hex EzCan Accessory Manager (Gen 2)
The ezCAN plugs directly into your motorcycle and listens to the CAN-bus. The best plug and play solution to add accessories to your motorcycle without the need to cut any wires that could void your warranty. This is the latest version of the ezCAN with four high power output channels which have ultimate configuration! Customise your bike and make it safer to ride. NET QUANTITY 1N x ezCAN Device 1N x Micro USB Cable 2N x Velcro Strips 2N x Blanking Plugs 4N x Cable Ties 4N x Two-wire stub connectors (Orange) 4 x Terminal wires (Orange) 4 x Blanking seals
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: H3-HNH-002 -
Batteries and Electricals
MT 3-Pin Female Connector Set
MT 3-Pin Female Connector Set
The MT 3-Pin Female Connector Set forms part of our ezCAN Spares product collection. These products are “add-on†spares available for use with our HEX ezCAN devices. Description This Female Connector Set contains: 3 x Female Connectors 9 x Terminals 9 x Wire seals You will find this product useful if you are making extension cables between your ezCAN and any accessory that has a MT 3pin male connector
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: H1-EZS-007 -
Batteries and Electricals
MT 3-Pin Male Connector Set
MT 3-Pin Male Connector Set
The MT 3-Pin Male Connector Set forms part of our ezCAN Spares product collection. These products are “add-on†spares available for use with our HEX ezCAN devices. Description This Male Connector Set contains: 3 x Male Connectors 9 x Terminals 9 x Wire seals 3 x Blanking seals You will find this product useful if you are making extension cables for your ezCAN or if you want to attach connectors to any accessory that will plug into any of your ezCAN output channels.
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: H1-EZS-008 -
Batteries and Electricals
MT 3-Pin Male Connector Stub Set
MT 3-Pin Male Connector Stub Set
This MT 3-Pin Male Connector Stub Set forms part of our ezCAN Spares product collection. These products are “add-on†spares available for use with our HEX ezCAN devices. Description This product contains: 2 x Connector Stubs (2-wire pigtails) 2 x terminated wires (control signal for 3-wire loads) 2 x blanking seals Attach these stubs to your accessories to connect your accessories to your ezCAN.
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: H1-EZS-001 -
Batteries and Electricals
Triumph Hex EzCan Accessory Manager
Triumph Hex EzCan Accessory Manager
The ezCAN plugs directly into your motorcycle and listens to the CAN-bus. The best plug and play solution to add accessories to your motorcycle without the need to cut any wires that could void your warranty. This is the latest version of the ezCAN with four high power output channels which have ultimate configuration! Customise your bike and make it safer to ride. NET QUANTITY 1N x ezCAN Device 1N x Micro USB Cable 2N x Velcro Strips 2N x Blanking Plugs 4N x Cable Ties 4N x Two-wire stub connectors (Orange) 4 x Terminal wires (Orange) 4 x Blanking seals
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: H3-TRI-002 -
Batteries and Electricals
Universal Splitter Cable
Universal Splitter Cable
Universal Splitter Cable: Description: The Universal splitter fits inline between the ezCAN and the CAN-bus connector allowing a second ezCAN to be connected for a daisy-chain connection. This splitter cable is compatible with the following ezCAN devices: ezCAN Daytona for Harley Davidson ezCAN Laconia for Harley Davidson ezCAN Sahara for Honda ezCAN Scandes for Husqvarna ezCAN Gobi for KTM ezCAN Tagus for Triumph
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: H1-UEA-001 -
Batteries and Electricals
Yamaha Hex EzCan Accessory Manager (Gen 2)
Yamaha Hex EzCan Accessory Manager (Gen 2)
The ezCAN plugs directly into your motorcycle and listens to the CAN-bus. The best plug and play solution to add accessories to your motorcycle without the need to cut any wires that could void your warranty. This is the latest version of the ezCAN with four high power output channels which have ultimate configuration! Customise your bike and make it safer to ride. NET QUANTITY 1N x ezCAN Device 1N x Micro USB Cable 2N x Velcro Strips 2N x Blanking Plugs 4N x Cable Ties 4N x Two-wire stub connectors (Orange) 4 x Terminal wires (Orange) 4 x Blanking seals
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: H3-YT7-002
