All Item Groups

BMW R18 Styling – Cockpit Fairing (Sports)

Our »Rock ’n‘« Roll cockpit fairing is a fantastically designed, striking fairing that attaches to the handlebar with unmistakably high recognition value at first glance. It combines a refined appearance with sportiness in a perfect balance. The refined note comes from the incorporation and evolution of the two white lines on the R 18 against the matching, deep black background (Blackstorm metallic). We employ a specialist, a master of perfect brush painting, to apply the twin lines in different widths by hand. The lacquering itself is also done by hand. We achieve the sporty note through the extraordinarily narrow, elongated form and design that is inclined towards the rider. All of this integrates naturally into the high-quality design of the big cruiser and adds a distinct accent to the front and side silhouette of the Big Boxer. Alongside the design, the quality aspects aren’t forgotten either – quite the opposite. The cockpit fairing that perfectly encloses the headlight with small gap dimensions is deep-drawn. The form is then manufactured to precision on a CNC mill. The modest bracket consists of suitably powder-coated precision stainless steel tubing. The three-dimensional form ensures precision connections and the necessary stiffness of the base for our cockpit fairing. Our cockpit fairings combined with our quality components – engine protection bar, sissy bar and licence plate holder – give you the opportunity to design your BMW R 18 to your personal tastes. The complete Wunderlich package sets differentiated accents and sets the Wunderlich R 18 apart from the series design in a striking way. The facts Function Fantastically designed, striking fairing that attaches to the handlebar, with obvious high recognition value, that sets individual accents in the front and side silhouette of the Big Boxer Combines a refined appearance with sportiness in a perfect balance Done by a steady hand: Perfectly brush-painted lines Lacquered in Blackstorm metallic, also done by hand Sporty note through the extraordinarily narrow, elongated form and design that is inclined towards the rider Encloses the headlight with low gap dimensions Discreet bracket made of precision stainless steel tubing ? the perfect base for the cockpit fairing Includes all necessary assembly material With detailed assembly instructions Technical information: Material: High-quality ABS plastic manufactured in a deep-drawing process and then shaped on a CNC mill, lines and lacquer applied by hand Dimensions: Width: 340 mm Height: 430 mm Depth: 340 mm Component thickness: 5 mm Features: Wunderlich premium product. Small series. Hand crafted. Wunderlich design. Integrated and functional. Screen If included The matching windshield for our Rock ’n‘ Roll cockpit fairing Sporty, narrow form that inclines low towards the rider Smoky-grey tint Optimum aerodynamics Clear transparency with zero visual distortions Polished/rounded edge (no edge protection necessary). Easy installation Incl. assembly materials and fitting instructions Technical information: Material: Very high-quality, visually clean, highly durable, non-scratch, UV and petrol-resistant PMMA plastic for optimum transparency Dimensions: Width: 325mm Height: 320mm Depth: 80mm

Key Features

• High-quality construction
• Durable
• Easy installation

BMW RNineT Styling – Front Fender (Hight or Low)

Fender Classic Front R nineT : This short, beautiful front wheel fender made of brushed aluminium is truly eye-catching, giving the R nineT a new and striking front-end look. In the high version, the quality protective guard is attached to the lamp holder with two black anodized retaining plates. The low version is attached to the original mounts with a black coated round tube mounting bracket. Light, but highly stable. MANUAL MANUAL VIDEO

Key Features

• High-quality construction
• Durable
• Easy installation

BMW RNineT Styling – Handlebar Covers

If the handlebar of the R nineT is converted as a stump handlebar, the holes from the original handlebar fitting often look unappealing. These refined and well-fitted covers close the open screw holes on the handlebar clamps and significantly raise the visual quality of the yoke.

Key Features

• High-quality construction
• Durable
• Easy installation

BMW RNineT Styling – Swing Arm Number Plate Holder “Centre”

Swing Arm Number Plate Holder Centered – Black : Discretely and lightweight number plate bracket which integrates excellent into the sporty line of the Roadster. The facts: Sturdy pipe construction made of stainless steel. Powder-coated Cable bushing hidden in the pipes LED number plate lighting, can be mounted on top or on side. Number plate is adjustable in height and inclination Easy mounting Combinable with knobby tires, 180 and 90 tires MANUAL

Key Features

• High-quality construction
• Durable
• Easy installation

BMW RNineT Styling – Swingarm Pivot Cover

Swing arm Pivot Cover Classic Design : The large cavities of the swing arm pivot are permanently and securely protected. This is hardly possible with the black original plastic covers, since they just about jump off after the first hard contact with the boot. The result: The holes get covered in dirt and the pivot corrodes. Our anodised aluminium covers not only cover the pivot in an elegant manner, they also provide a very secure closure. Tip: Many aftermarket covers are simply inserted and held in place the help of an O-ring, which almost guarantees it will fly off eventually. We rely on a special set screw that pushes an “O” – ring against the inner wall of the hole; although this is technically elaborate, it is the only sensible way of fitting the cover. CNC-turned, milled and anodised or polished “Dural” aluminium in two different designs. Easy to install: Position the cover, tighten the set screw and the cover is already seated securely MANUAL

Key Features

• High-quality construction
• Durable
• Easy installation

BMW RNineT Styling – Tail Tidy “LOW” – STRIP

Wunderlich Tail Section “LOW” (with Tail Light Conversion) – Black-Titanium : Unobstructed view of the tires and an uncompromising Retro-Style . The facts: Light weight, reduced to the bare essentials aluminum license plate carrier directly at the cardan. The license plate carrier can be displaced on the ground plate ( farther or closer to the tire). Thanks to oblong holes, the license plate can be also displaced in height. Same drilling pattern as for the original license plate (no other drill holes necessary) The carrier of the rear light | indicator mount (below the seat) covers the entire gap of the seat-bottom . Turn signal brackets over easily movable carriage laterally extendable. Indicator can be positioned at several positions to the vehicle axis. Laser cut, coated Aluminium | VA or Bi-Color with electro-polished VA-carrier and license plate-plate in titanium. Can be combined with all original turn signals (standard & LED) or Kellermann turn signals. Passenger seat–mounting as the original. Incl. cat’s eye reflector carrier (also height adjustable) and E- approved cat’s eye reflector. With flat LED license plate illumination. With ABE approval. Scope of supply: Base carrier for installation below the seat with several possible indicator positions (adjustable to the vehicle axis and in width) License plate carrier LED license plate lighting, cat’s eye reflector | – carrier and complete fitting kit.With bracket for original rear light For original 2 persons seat (not for original humps) Not for cusp modifier, Comfort passenger seat MANUAL MANUAL VIDEO

Key Features

• High-quality construction
• Durable
• Easy installation

BMW RNineT Styling – Tail Tidy “LOW” + Strip Small

Wunderlich Tail Section “LOW” (with Tail Light Conversion) – Black-Titanium : Unobstructed view of the tires and an uncompromising Retro-Style . The facts: Light weight, reduced to the bare essentials aluminum license plate carrier directly at the cardan. The license plate carrier can be displaced on the ground plate ( farther or closer to the tire). Thanks to oblong holes, the license plate can be also displaced in height. Same drilling pattern as for the original license plate (no other drill holes necessary) The carrier of the rear light | indicator mount (below the seat) covers the entire gap of the seat-bottom . Turn signal brackets over easily movable carriage laterally extendable. Indicator can be positioned at several positions to the vehicle axis. Laser cut, coated Aluminium | VA or Bi-Color with electro-polished VA-carrier and license plate-plate in titanium. Can be combined with all original turn signals (standard & LED) or Kellermann turn signals. Passenger seat–mounting as the original. Incl. cat’s eye reflector carrier (also height adjustable) and E- approved cat’s eye reflector. With flat LED license plate illumination. With ABE approval. Scope of supply:Base carrier for installation below the seat with several possible indicator positions (adjustable to the vehicle axis and in width), license plate carrier, LED license plate lighting, cat’s eye reflector | – carrier and complete fitting kit. With bracket for original rear light For original 2 persons seat (not for original humps) This product fits to : R nineT (2014 – 2016) R nineT (2017 -) R nineT Pure R nineT Racer R nineT Scrambler R nineT Urban G/S Brand : Wunderlich MANUAL MANUAL VIDEO

Key Features

• High-quality construction
• Durable
• Easy installation