Protection

BMW R Series GS LC Protection – Skid Plate

A slight rough contact with the ground and can damage the engine housing of you bike. This skid plate protects the manifold and engine block from violent ground contact or rock impact. HEPCO BECKER skid plates are designed for protection while making your bike look great! Solid premium aluminium skid plate 100 % MADE & DESIGNED IN GERMANY 3-4mm Thickness of the aluminium Perfect blend of gap between the Engine and Skid plate ensuring the the dents are absorbed between the gaps while ensuring the ground clearance is not reduced Made and designed as per the lines of the bike Adapted to fit the engine and exhaust system of the bike FITS UPTO 2018 MODELS Manual

Key Features

• High-quality construction
• Durable
• Easy installation

BMW R Series GS Protection – Centre Stand Plate (Xtreme)

Centre Stand Protection Plate : The logical complement to the engine protection system. The engine protection effect theme continues with the centre stand. The centre stand, catalytic converter header pipe and swing arm mounting are all protected from serious damage. And, in addition, should it bottom out, the bike can glide along the ground on a fully protected undercarriage until the rear wheel finds purchase again. The facts: 4 mm (0.15”) strong aluminium. Integrated swages bring high stability. Secure, easily fitted restraint systems. Maximum protection for main centre stand, header pipe and swing arm. Made in Germany. Will not fit with the original BMW engine sump guard “Enduro”. MANUAL

Key Features

• High-quality construction
• Durable
• Easy installation

BMW R Series GS Protection – Radiator – Water Cooler Grill

Xtreme Water Cooler Protection Grill – Black : The water cooler is perfectly positioned for the on-rushing air stream, so that all kinds of dirt can get concentrated in the cooler. Stones, insects and other types of grime accumulate in the delicate fins. Cleaning is thoroughly laborious and requires lots of elbow grease. The fine mesh stainless steel grille of the EXTREME radiator guard protects the radiator effectively and ensures lasting optimal cooling air flow. Optimal protection and refinement of the cooler. Blocks all destructive elements from reaching the cooler. Dual protection: Ventilation blades catch large stones, etc. and the stainless steel grille behind it filters out all smaller projectiles. Stable frame made from anodized aluminum Vibration-isolated mounting Sophisticated connection technology between grille and frame Delivered as a kit (left+right) incl. mounting material Technical information Material: Frame made of high-quality, 2 mm thick aluminum, grille made of robust stainless steel Dimensions (WxH): 135mm x 200mm MANUAL

Key Features

• High-quality construction
• Durable
• Easy installation

BMW R Series GS Protection – Slider Crash Hub

BMW RT & GS Series Paralever Slider Small, but ingenious and efficient. Our crash pads protect the sensitive instrument surrounds and are themselves resistant to any damage. These crash protectors, already proven in racing, keep the tarmac at a safe distance and prevent major damages to the expensive final drive housing. Installation is simple. Remove the original plastic cap, insert the slider and tighten the central bolt. Tightening the bolt expands the sleeve and the slider is locked firmly in place. Effective protection. double protection against impact and grinding Racing-Design for low frictional resistance/shear force for a lightly tipping over Highly resistant special plastic. User-friendly and quick installation. Complete with everything needed. Made in Germany Easy to fit View Instruction Manual

Key Features

• High-quality construction
• Durable
• Easy installation

BMW R Series GS Protection – Tank Guard

BMW R1250GS & R1200GS Protection – Engine Tank Guard : This tank protection bar is not only reliably protecting the tank, it is also protecting the fairing and the high vulnerable radiator. Furthermore the R 1250 GS becomes a distinctive and individual look. The tank protection bar can be mounted both with our crash bar and with the original BMW crash bar, or with any other cylinder guard. The facts: Protection of radiator/fans & tank fairings Suitable with Wunderlich crash bars and original crash bars, or any other cylinder guard. Equal distribution of forces. Strong mounting points. Perfect fit. Useful beams for our Micro-Flooter or Aux lights. Detailed and easy to understand instructions. Easy mounting. Made in Germany. STAINLESS STEEL IS NOT just the finish it is actual Inox Steel from Germany Installation Manual

Key Features

• High-quality construction
• Durable
• Easy installation

BMW R Series GS Protection – Valve & Cylinder Cover “EXTREME”

BMW R1250GS/GSA Protection – Valve & Cylinder Cover “EXTREME” : The cylinders on a Boxer BMW are exposed. Stone strikes, falls on terrain or when scraping a plastered wall as you manoeuvre in tight spaces make it easy to scratch the valve cover. On the 1250s shift cam engines there’s also the issue that the construction of the shift cam mechanism is extremely elaborate. Since the valve covers are mounted solely using force locking, there is a risk that the valve cover can be displaced relative to the cylinder head after any violent impact and the elaborate valve drive can be pulled along with it in certain instances. This is why the additional protection of the valve cover is of particular importance. We have developed a set of well-designed protectors for this. These are characterised by the fact that they sit on the valve cover with narrow gap dimensions and accurately fit the contour. This requires precision manufacturing. The protector consists of impact-resistant, durable plastic. On the inside which faces the valve cover, we have constructively integrated segments with an elastic material that is resistant to high temperatures. These segments are dimensioned to be impact-absorbing in terms of Shore hardness*). When impacted by exterior forces, their equally supportive and protective effective ensures that these are absorbed and distributed equally across the segments and force spikes are thus avoided. The high-quality design and the function of the protectors is rounded off by an inset stainless steel insert. In the worst case scenario, it protects against grinding of the valve cover and thus avoids the inevitably associated loss of oil. The protectors thus contribute to avoiding secondary damage. In many instances, they let you carry on riding after the mishap. The assembly kit provided makes assembly easy. Our valve protectors are Made in Germany. That’s why we’re happy to provide a 5-year warranty. Please note: Our valve cover & cylinder protectors only fit with the BMW standard valve covers. They fit with Hepco Becker Engine guards and Wunderlich engine guards Facts Function Reliable protection of the valve cover against the consequences of stone strikes, against damage from a fall or when manoeuvring Precision manufactured, contour fit with small gap dimensions Made of durable, impact-resistant special plastic Constructively integrated impact-absorbent segments Avoidance of force spikes through equal distribution of effective forces over multiple segments Stainless steel insert for protection against grinding of the valve cover in the event of a crash Avoid secondary damage Integrated design that incorporates into the layout of the motorcycle Complete with assembly kit Techn. data Material: High-quality, impact-resistant, fiberglass reinforced plastic, precision manufacture with integrated impact-absorbing segments, integrated stainless steel insert for protection of the valve cover Features Wunderlich premium product. Small series. Made by hand. Wunderlich design. Integrated and functional. Wunderlich product category Protection Design

Key Features

• High-quality construction
• Durable
• Easy installation

BMW R Series Protection – Cardan Guard

Wunderlich Kardan Guard – Black : The perfect protection for your BMW’s paralever! Our Kardan guard sits beneath the rear axle drive and protects the hollow drilled rear axle and the paralever joint in case you get a little closer to the tarmac than you want. Effective protection both on the road as well as in active offroading. Reliably prevents damage to the light metal housing Simple fitting with no changes required to the vehicle Can be removed without leaving a trace Slim and discreet design tailored to the Kardan but still highly effective Perfect protection on or off-road Tested extensively in practical trials Instruction

Key Features

• High-quality construction
• Durable
• Easy installation

BMW R Series Protection – Engine Crash Bar “Sports Style”

The engine protection bar reliably protects the cylinders and valve cover. The all-round protection concept increases passive safety and thus the joy of the ride. In the event of a crash or fall, the effective forces are optimally distributed across the structure of the protection bar and the durable attachment points, thus avoiding high forces. The engine protection bar is made from 16 mm, precision stainless steel tubing. The tube segments are formed and then clean welded on a computer-controlled CNC pipe bending machine. The Sport engine protection bar integrates visually into the design of the motorcycle but is a little smaller and more discreet than our normal engine protection bar. The protective function and product design are the central focus with our protection bars. The engine protection bar formally emphasises the machine’s contours. The surfaces are black powder-coated and thus add an additional accent. Maintenance work can be performed on the bike without having to disassemble the protection bar. The facts: Function Uniform distribution of the forces over 3 points per vehicle side Perfect protection of the cylinders, valve covers Maximum protection combined with minimal weight No restriction of ground clearance Plug-n-Play fit: uncomplicated assembly including detailed fitting instructions Technical info Material: High quality steel with high tensile strength and break elongation Pipe diameter: 16 millimetres

Key Features

• High-quality construction
• Durable
• Easy installation

BMW R Series Protection – Injection Cover Guard (Set)

Injection Cover – Right : The inlet assembly including duct, injector, connections and throttle sensor are always in danger of being torn off. Also, there have been several cases of someone finding it funny to remove the small black vacuum plugs on our long term testing bikes. Water penetrates into the electrical connectors, caused by repeated contact with boots, trousers etc. We visually extend the cylinder unit and the unattractive looking injection system is not visible anymore, creating a new, dynamic unit. A uniform design that has not been seen before. Protection for sensitive components (injectors, fuel line connections, inlet duct, throttle sensor etc.) Prevents accidental (or “hostile”) unplugging or disconnecting of plugs and connectors). Protection against wear for the complete injection and intake pipe unit. Reduced risk of injury. Shape of part makes it rigid and almost indestructible. ABS plastic. Robust attachment system (anodised aluminium). Easy to install. Complete with installation kit. This product fits to : R 1200 GS LC (2013 – 2016) R 1200 R LC 2015- MANUAL VIDEO VIDEO

Key Features

• High-quality construction
• Durable
• Easy installation

BMW R Series Protection – Paint Shield Set

An indestructible yet flexible adhesive film originally developed for the aviation industry to protect propellers and rotor blades from stone damage. Anything that provides protection at close to the speed of sound is of course the first choice when it comes to maintaining the value of your BMW. The facts: Invisible protective film to protect your paintwork from those annoying scratches and scuffs that reduce the value of your bike. Absorbs most of the energy e.g. from stone impacts, which means that it makes sense to fit the headlamp protection included in the complete set at the same time. Completely UV resistant. UV permeable(!) meaning that the protected parts of the paintwork will, as usual, change colour over the years. This outstanding feature of the material means that no differences in colour between protected and unprotected paintwork will emerge should you ever want to remove the film. Almost invisible. Contour-hugging fit, that blends perfectly into the overall form. Extremely adhesive. Yet easy to remove. Quick payback (in terms of maintained value). You can continue to steam clean your bike. Easy to apply. Protects all particularly vulnerable parts. The set includes cleaning fluid, applicator and fitting instructions: everything you need to fit the film yourself. You can choose between a tank set and a complete set. The tank set consists of three films, two for the sides and one for the upper half of the tank. The whole set – Please see image

Key Features

• High-quality construction
• Durable
• Easy installation

BMW R Series Protection – Slider Paralever (Rear)

Paralever Crash Pad – Black : Small, but ingenious and efficient. Our crash pads protect the sensitive instrument surrounds and are themselves resistant to any damage. These crash protectors, already proven in racing, keep the tarmac at a safe distance and prevent major damages to the expensive final drive housing. Installation is simple. Remove the original plastic cap, insert the slider and tighten the central bolt. Tightening the bolt expands the sleeve and the slider is locked firmly in place. The facts: Effective protection. double protection against impact and grinding Racing-Design for low frictional resistance/shear force for a lightly tipping over Highly resistant special plastic. User-friendly and quick installation. Complete with everything needed. Made in Germany Easy to fit MANUAL VIDEO

Key Features

• High-quality construction
• Durable
• Easy installation

BMW R Series Protection – Stand (Side) Switch Guard

Switch Guard : The reliable protection for the safety switch on the side stand. The ignition disconnect switch is situated on the side stand’s rotary axis – and is thus in an exposed position. This electronic component can be damaged through a collision with an obstacle, even on journeys through easy terrain. This may potentially lead to the motor being switched off or failing to start.

Key Features

• High-quality construction
• Durable
• Easy installation