Protection

BMW R1250R Protection – Engine Crash Bars :- Additional Off road Support

Hepco Becker Engine Bar – Support Bar : The compound strut functions as a connector for both the right and left engine protection bars. It runs in front of the alternator cover and screws directly onto the bore holes for this together with the bars. The strut incorporates an M8 threaded insert. The necessary screws and disks are included in the pack. Thanks to the compound strut, the effective forces in the event of a crash are also transferred from a protection bar on one side to both sides. Pressure and tensile forces are thus distributed across both sides. The forces that effect the engine via the bar composite are optimally distributed and greater damage can thereby be avoided. Based on the design of the R 1250 R, The facts: Function Enhanced protection effect thanks to the greater stiffness of the compound structure Equal, optimal distribution of forces to the protection bars on both sides via the compound strut Minimal weight Brand: Hepco & Becker Instruction Manual

Key Features

• High-quality construction
• Durable
• Easy installation

BMW R1300GS Protection – Oxygen Sensor

Function Effective protection of the oxygen sensors from branches, stones and other foreign bodies Reduces soiling of the sensitive sensors Durable, stiff component geometry for robust protection Openings to counter heat build-up Multi-point attachment Easy assembly, can be assembled either with our Wunderlich engine protection bar or without one Set consisting of an oxygen sensor guard for right and left Technical information Material: Aluminium, high-quality and precision crafted, black anodised Function: Wunderlich design. Functional and integrated. Small series. Handcrafted. The oxygen sensors, which supply important parameters for controlling the engine, cannot be repaired in the event of damage or destruction, only replaced. That’s why it is recommended that the sensors and their function be effectively protected. The oxygen sensors relay important parameters from the exhaust system and the engine control unit. The engine control unit on the other hand in turn uses this information and additional parameters (e.g. load status, throttle grip placement, camshaft phasing) to control the fuel inject (mix composition) and ignition time. Damage to the oxygen sensors or their signal cables can lead to faulty parameters. Faulty parameters in turn lead to faulty engine control signals, which can negatively impact the performance and efficiency or function of the engine. The consequences of ineffective fuel combustion include performance issues, engine problems, higher fuel consumption and increased pollutant emissions due to the less than optimum combustion. All issues that should be avoided. Our robust, effect oxygen sensor guard covers each of the vulnerable oxygen sensors screwed into the two exhaust manifolds as well as the attached cables, and provides optimum mechanical protection for both sensors. It consists of anodised aluminium with a sheet thickness of 1.5 mm. The precise edging, which also increases the component rigidity, provides effective protection when used with the multi-point attachment. The oxygen sensor guard comes with openings that prevent heat build-up. Form and function integrate brilliantly into the engine layout.

Key Features

• High-quality construction
• Durable
• Easy installation

BMW R18 Protection – Engine Guard

BMW R18 Protection – Engine Guard The first protection bar made of 32 mm tube! We opted for this pipe dimension for two reasons: For reasons of strength, to optimally protect the R 18, and for aesthetic reasons. Because only the 32 mm pipe looks balanced and aesthetic on the imposing R 18 – and around the mighty elbow pipes. In addition, we deliberately opted for a closed, one-piece shape of the protective bar, which, in addition to the dimensioning, contributes additional structural rigidity. The high-quality powder-coated protective bar with a clear lacquer finish – perfectly matching the frame – fits discreetly into the overall style of the R 18 and still sets its own coordinated accent. It is no coincidence that the spade-shaped shape is reminiscent of the protective bars of the classic air-cooled BMW boxers. The engine protection bar is solidly supported at six selected points. The lower struts, which are hinged to the frame beams, were arranged discreetly by our designers so that they do not catch the eye and do not disturb the overall line. The multi-point attachment ensures that the forces introduced in the event of a fall or tipping over do not occur and act selectively, but are absorbed via the protective bar over all 6 attachment points. The punctual stress caused by force or moment peaks is significantly reduced. Perfect protection of the cylinders and valve covers Aesthetic integration in form and execution High-quality powder-coated and then clear-coated 32 mm tube Closed shape Solid, asymmetrical 6-point mounting Point loads due to force or torque peaks are significantly reduced No impairment of inclines and ground clearance Perfect fit and easy to assemble Detailed and easy to understand instructions Technical specifications Material: Precision steel tube, precisely shaped on CNC tube bending machines and then welded with a clean seam pattern, high-quality powder-coated in black and finished with clear varnish Pipe diameter: 32 millimeters Wall thickness: 2 millimeters Whimsical product. Small series. Made by hand. Whimsical. Integrated, functional design. Made in Germany

Key Features

• High-quality construction
• Durable
• Easy installation

BMW RT Series Protection – Tank Guard

This tank protection bar not only reliably protects the tank but the faring of the stem and the highly at risk radiator units. Together with the engine protection bar, it forms a sophisticated all-round protection concept for passive safety: In the event of a crash or fall, the effective forces are optimally distributed across the structure of the protection bar and the durable attachment points, thus avoiding high forces. The protection bar integrates very well into the design of the bike on a visual level and highlights the striking look. The tank protection bar is made from a composite of 25 mm and 18 mm precision stainless steel tubing. These consist of tube segments that are shaped on CNC pipe bending machines specifically for each model and then clean welded. The protective function and product design are the central focus with our protection bars. We therefore off the protection bar in black. The steel surface is powder-coated. This means the clever protection integrates into the design of your BMW. The facts: Function Sophisticated all-round protection concept for passive safety Protective function and integrated product design Perfect, model-specific fit Fits only with Wunderlich engine protection bars Protection of the radiator/ventilators, tank side panel, the stem Equal distribution of effective forces Technical info Material: Steel Pipe diameter: 18-25 millimetres Detailed, easy-to-understand fitting instructions

Key Features

• High-quality construction
• Durable
• Easy installation