Bike Maintenance
Showing 2233–2256 of 2328 results
-
Bike Care
Swing Arm Bearing Kit (1217)
Swing Arm Bearing Kit (1217)
Swing Arm Bearing Kit Kawasaki KX250F 17-22, KX250X 21-22, KX450F 17-22, KX450SR 22, KX450X 21-22 Kit Contents Description QTY per Kit Washer 4 Thrust Bearing 2 Seal 4 Needle Bearing Shaft 2 Needle Bearing 2 Bushing 2
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 28-1217 -
Tool
Tool Kit Case 18.5L
Tool Kit Case 18.5L
Tool Kit Case for Motorcycles by Hepco Becker “SOLID” Waterproof Polypropylen – Cases Suitable for air travel and shatter-proof Extremely rugged Absolutely :- Watertight, dust proof and Airtight (IP-67) Temperature resistant :- -33 to + 90 C Stackable Ergonomic handle Polypropylene material Fixture for padlock Inside:- Bottom can be filled with cube-foam for individual adaptation Lid can be filled with nap-foam to Fix instruments Dimension ( mm): 425 x 290 x 150 Weight:- 3.2 kg Material: PP ( Polypropylen-Cases) Finish: -Black Styles of fitment as a topcase:- Spare parts for fitting on to an Hepco Becker Alu Rack / Easy Rack Adaptors to fit on the tail of the bike. The adaptors level the tail plain and with a flat plate you could install the top tool case on it. Spare parts for fitting on to an Hepco Becker Enlargement Plate
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 00 5610 8019 -
Oil Filter
Transmission Filter 117 – Hiflo
Transmission Filter 117 – Hiflo
HiFlo Filtro Honda Transmission Filter Fitment chart Drawing upon over four decades of research and development, HiFloFiltro Oil Filters provide the highest quality in filtering with a longer life than comparable OEM filters. Built with the best materials available, HiFloFiltro Oil Filters give increased performance at an unbeatable price. HiFloFiltro Oil Filter, product approved and production monitored – the only motorcycle oil filters in the world to carry the stringent TUV and ISO certifications OE Manufacturer – OE Specs plus performance Best Consumer Value – Best Quality and Price Most Complete Range for Motorcycles and ATV Note: Replacement O-Rings may not be included!
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: HF117 -
Tool
Universal Tool Bag 17Ltr
Universal Tool Bag 17Ltr
Universal Tool Bag 17Ltr 5854 Inner Dimension ( mm): 340 x 260 x 195 Weight:- 1.5Kgs Material: Nylon 1680 D Finish: -Black (Delivery without tools) Brand: Hepco Becker
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: W00 5854 8019 -
Bike Care
Waterproof Grease
Waterproof Grease
Waterproof Grease :- WATERPROOF GREASE is a smooth, E.P. Lithium complex multi-purpose grease manufactured in a NLGI #2 consistency- with the added benefits of a high density polymer to provide optimum service under most ambient temperature conditions. This distinctive multi-functional lubricating grease has very good mechanical stability (won’t thin out under normal usage), has excellent resistance to water wash out, clings to metal surfaces under severe conditions as it effectively reduces the coefficient of friction. Fortified with non leaded extreme pressure additives for high load carrying ability and extra protection under shock loading conditions. Rust & corrosion inhibitors provide a further margin of superior performance and protection under a wide variety of adverse operating conditions.Dries quickly and completely Salt Water Resistant Low-Friction Protects against rust & corrosion Reduces wear Long lasting Resists heat & shock loads Wide operating temperature range Safety Data Technical Data
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 80916 -
Tool
Wheel Balancing Tool for BMW
Wheel Balancing Tool for BMW
The hub of the rear wheel rim has a diameter for which there are no standard axle attachment points for balancing. Now there is! Our balance adapter sits snugly inside the wheel hub, centres it and screws onto the flange of the rim at five points. This means the 25 mm axles of all standard balancers or balancing stands can accommodate the rear wheel safely and without clearance. We include a matching axle (Ø 25 mm, length 420 mm) with our balance adapter. Facts Function Balance adapter for rear wheel This means the 25 mm axles of standard balancers or balancing stands can be used Precision centred hub seat, secure screw with 5-bore flange Including axle (Ø 25 mm, length 420 mm) Easy to use Technical info: Material: High-strength POM-C copolymer, precision turned and equipped with 5 bore holes for attachment
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 21300-200 -
Bike Care
Wheel Bearing Kit ( 1422) – Rear
Wheel Bearing Kit ( 1422) – Rear
Wheel Bearings Kit All Balls Racing Wheel Bearings feature High-Speed bearings that are manufactured to ABEC 3 precision levels, triple lip rubber seals that keep the grease in and the water and dirt out all while utilizing a Chevron SRI 2 grease that contains rust and oxidation inhibitors. Installation Inspection Inner Spacer: Check the bore to make certain it is clean and the axle easily passes through it. Check each end for wear and burrs. The edges must be square to seat properly against the new bearings. If the old bearings failed it is a good idea to confirm that the center spacer has not been damaged. Make sure the inner space is the same length or slightly longer than the bearing stops in the hub or carrier.  Wheel Hub: Clean the hub, removing any dirt and corrosion. Make certain not to remove metal. This will adversely affect bearing fit. Outer Wheel Spacers: Clean the outer wheel spacers and inspect them for wear on either end as well as wear on the outer surface where it makes contact with the seal. If the spacers are excessively worn they should be replaced. Bearing Installation Note 1: Improper installation can cause bearing damage and dramatically reduce bearing life. Note 2: Heating the wheel hub will cause the hub to expand slightly and will make bearing installation easier. DESCRIPTION QTY PER KIT Ball Bearing 2 Seal 2 Installation Manual
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 25-1422 -
Bike Care
Wheel Bearing Kit ( 1712) – Rear
Wheel Bearing Kit ( 1712) – Rear
Wheel Bearings Kit All Balls Racing Wheel Bearings feature High-Speed bearings that are manufactured to ABEC 3 precision levels, triple lip rubber seals that keep the grease in and the water and dirt out all while utilizing a Chevron SRI 2 grease that contains rust and oxidation inhibitors. Installation Inspection Inner Spacer: Check the bore to make certain it is clean and the axle easily passes through it. Check each end for wear and burrs. The edges must be square to seat properly against the new bearings. If the old bearings failed it is a good idea to confirm that the center spacer has not been damaged. Make sure the inner space is the same length or slightly longer than the bearing stops in the hub or carrier.  Wheel Hub: Clean the hub, removing any dirt and corrosion. Make certain not to remove metal. This will adversely affect bearing fit. Outer Wheel Spacers: Clean the outer wheel spacers and inspect them for wear on either end as well as wear on the outer surface where it makes contact with the seal. If the spacers are excessively worn they should be replaced. Bearing Installation Note 1: Improper installation can cause bearing damage and dramatically reduce bearing life. Note 2: Heating the wheel hub will cause the hub to expand slightly and will make bearing installation easier. DESCRIPTION QTY PER KIT Ball Bearing 2 Seal 2 Installation Manual
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 25-1712 -
Bike Care
Wheel Bearing Kit ( 1749) – Rear
Wheel Bearing Kit ( 1749) – Rear
Wheel Bearings Kit All Balls Racing Wheel Bearings feature High-Speed bearings that are manufactured to ABEC 3 precision levels, triple lip rubber seals that keep the grease in and the water and dirt out all while utilizing a Chevron SRI 2 grease that contains rust and oxidation inhibitors. Installation Inspection Inner Spacer: Check the bore to make certain it is clean and the axle easily passes through it. Check each end for wear and burrs. The edges must be square to seat properly against the new bearings. If the old bearings failed it is a good idea to confirm that the center spacer has not been damaged. Make sure the inner space is the same length or slightly longer than the bearing stops in the hub or carrier.  Wheel Hub: Clean the hub, removing any dirt and corrosion. Make certain not to remove metal. This will adversely affect bearing fit. Outer Wheel Spacers: Clean the outer wheel spacers and inspect them for wear on either end as well as wear on the outer surface where it makes contact with the seal. If the spacers are excessively worn they should be replaced. Bearing Installation Note 1: Improper installation can cause bearing damage and dramatically reduce bearing life. Note 2: Heating the wheel hub will cause the hub to expand slightly and will make bearing installation easier. DESCRIPTION QTY PER KIT Ball Bearing 2 Seal 2 Installation Manual
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 25-1749 -
Bike Care
Wheel Bearing Kit ( 1814) – Rear
Wheel Bearing Kit ( 1814) – Rear
Wheel Bearings Kit All Balls Racing Wheel Bearings feature High-Speed bearings that are manufactured to ABEC 3 precision levels, triple lip rubber seals that keep the grease in and the water and dirt out all while utilizing a Chevron SRI 2 grease that contains rust and oxidation inhibitors. Installation Inspection Inner Spacer: Check the bore to make certain it is clean and the axle easily passes through it. Check each end for wear and burrs. The edges must be square to seat properly against the new bearings. If the old bearings failed it is a good idea to confirm that the center spacer has not been damaged. Make sure the inner space is the same length or slightly longer than the bearing stops in the hub or carrier. Wheel Hub: Clean the hub, removing any dirt and corrosion. Make certain not to remove metal. This will adversely affect bearing fit. Outer Wheel Spacers: Clean the outer wheel spacers and inspect them for wear on either end as well as wear on the outer surface where it makes contact with the seal. If the spacers are excessively worn they should be replaced. Bearing Installation Note 1: Improper installation can cause bearing damage and dramatically reduce bearing life. Note 2: Heating the wheel hub will cause the hub to expand slightly and will make bearing installation easier. Kit Contents Description QTY per Kit Ball Bearing 3 Seal 2
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 25-1814 -
Bike Care
Wheel Bearing Kit (1063) – Front
Wheel Bearing Kit (1063) – Front
Wheel Bearings Kit All Balls Racing Wheel Bearings feature High-Speed bearings that are manufactured to ABEC 3 precision levels, triple lip rubber seals that keep the grease in and the water and dirt out all while utilizing a Chevron SRI 2 grease that contains rust and oxidation inhibitors. Installation Inspection Inner Spacer: Check the bore to make certain it is clean and the axle easily passes through it. Check each end for wear and burrs. The edges must be square to seat properly against the new bearings. If the old bearings failed it is a good idea to confirm that the center spacer has not been damaged. Make sure the inner space is the same length or slightly longer than the bearing stops in the hub or carrier. Wheel Hub: Clean the hub, removing any dirt and corrosion. Make certain not to remove metal. This will adversely affect bearing fit. Outer Wheel Spacers: Clean the outer wheel spacers and inspect them for wear on either end as well as wear on the outer surface where it makes contact with the seal. If the spacers are excessively worn they should be replaced. Bearing Installation Note 1: Improper installation can cause bearing damage and dramatically reducing bearing life. Note 2: Heating the wheel hub will cause the hub to expand slightly and will make bearing installation easier. Kit Contents Description QTY per Kit Ball Bearing 2 Seal 2
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 25-1063 -
Bike Care
Wheel Bearing Kit (1211) – Front
Wheel Bearing Kit (1211) – Front
Wheel Bearings Kit All Balls Racing Wheel Bearings feature High-Speed bearings that are manufactured to ABEC 3 precision levels, triple lip rubber seals that keep the grease in and the water and dirt out all while utilizing a Chevron SRI 2 grease that contains rust and oxidation inhibitors. Installation Inspection Inner Spacer: Check the bore to make certain it is clean and the axle easily passes through it. Check each end for wear and burrs. The edges must be square to seat properly against the new bearings. If the old bearings failed it is a good idea to confirm that the center spacer has not been damaged. Make sure the inner space is the same length or slightly longer than the bearing stops in the hub or carrier.  Wheel Hub: Clean the hub, removing any dirt and corrosion. Make certain not to remove metal. This will adversely affect bearing fit. Outer Wheel Spacers: Clean the outer wheel spacers and inspect them for wear on either end as well as wear on the outer surface where it makes contact with the seal. If the spacers are excessively worn they should be replaced. Bearing Installation Note 1: Improper installation can cause bearing damage and dramatically reducing bearing life. Note 2: Heating the wheel hub will cause the hub to expand slightly and will make bearing installation easier. DESCRIPTION QTY PER KIT Ball Bearing 2 Seal 3
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 25-1211 -
Bike Care
Wheel Bearing Kit (1223) – Front
Wheel Bearing Kit (1223) – Front
Wheel Bearings Kit All Balls Racing Wheel Bearings feature High-Speed bearings that are manufactured to ABEC 3 precision levels, triple lip rubber seals that keep the grease in and the water and dirt out all while utilizing a Chevron SRI 2 grease that contains rust and oxidation inhibitors. Installation Inspection Inner Spacer: Check the bore to make certain it is clean and the axle easily passes through it. Check each end for wear and burrs. The edges must be square to seat properly against the new bearings. If the old bearings failed it is a good idea to confirm that the center spacer has not been damaged. Make sure the inner space is the same length or slightly longer than the bearing stops in the hub or carrier. Wheel Hub: Clean the hub, removing any dirt and corrosion. Make certain not to remove metal. This will adversely affect bearing fit. Outer Wheel Spacers: Clean the outer wheel spacers and inspect them for wear on either end as well as wear on the outer surface where it makes contact with the seal. If the spacers are excessively worn they should be replaced. Bearing Installation Note 1: Improper installation can cause bearing damage and dramatically reducing bearing life. Note 2: Heating the wheel hub will cause the hub to expand slightly and will make bearing installation easier. Description QTY per Kit Ball Bearing 2 Seal 2
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 25-1223 -
Bike Care
Wheel Bearing Kit (1282)
Wheel Bearing Kit (1282)
Wheel Bearings Kit All Balls Racing Wheel Bearings feature High-Speed bearings that are manufactured to ABEC 3 precision levels, triple lip rubber seals that keep the grease in and the water and dirt out all while utilizing a Chevron SRI 2 grease that contains rust and oxidation inhibitors. Installation Inspection Inner Spacer: Check the bore to make certain it is clean and the axle easily passes through it. Check each end for wear and burrs. The edges must be square to seat properly against the new bearings. If the old bearings failed it is a good idea to confirm that the center spacer has not been damaged. Make sure the inner space is the same length or slightly longer than the bearing stops in the hub or carrier.  Wheel Hub: Clean the hub, removing any dirt and corrosion. Make certain not to remove metal. This will adversely affect bearing fit. Outer Wheel Spacers: Clean the outer wheel spacers and inspect them for wear on either end as well as wear on the outer surface where it makes contact with the seal. If the spacers are excessively worn they should be replaced. Bearing Installation Note 1: Improper installation can cause bearing damage and dramatically reducing bearing life. Note 2: Heating the wheel hub will cause the hub to expand slightly and will make bearing installation easier. DESCRIPTION QTY PER KIT Ball Bearing 2 Seal 2
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 25-1282 -
Bike Care
Wheel Bearing Kit (1382) – Front
Wheel Bearing Kit (1382) – Front
Wheel Bearings Kit All Balls Racing Wheel Bearings feature High-Speed bearings that are manufactured to ABEC 3 precision levels, triple lip rubber seals that keep the grease in and the water and dirt out all while utilizing a Chevron SRI 2 grease that contains rust and oxidation inhibitors. Installation Inspection Inner Spacer: Check the bore to make certain it is clean and the axle easily passes through it. Check each end for wear and burrs. The edges must be square to seat properly against the new bearings. If the old bearings failed it is a good idea to confirm that the center spacer has not been damaged. Make sure the inner space is the same length or slightly longer than the bearing stops in the hub or carrier. Wheel Hub: Clean the hub, removing any dirt and corrosion. Make certain not to remove metal. This will adversely affect bearing fit. Outer Wheel Spacers: Clean the outer wheel spacers and inspect them for wear on either end as well as wear on the outer surface where it makes contact with the seal. If the spacers are excessively worn they should be replaced. Bearing Installation Note 1: Improper installation can cause bearing damage and dramatically reducing bearing life. Note 2: Heating the wheel hub will cause the hub to expand slightly and will make bearing installation easier. Kit Contents Description QTY per Kit Ball Bearing 2 Seal 2
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 25-1382 -
Bike Care
Wheel Bearing Kit (1386)
Wheel Bearing Kit (1386)
Wheel Bearings Kit All Balls Racing Wheel Bearings feature High-Speed bearings that are manufactured to ABEC 3 precision levels, triple lip rubber seals that keep the grease in and the water and dirt out all while utilising a Chevron SRI 2 grease that contains rust and oxidation inhibitors. Installation Inspection Inner Spacer: Check the bore to make certain it is clean and the axle easily passes through it. Check each end for wear and burrs. The edges must be square to seat properly against the new bearings. If the old bearings failed it is a good idea to confirm that the centre spacer has not been damaged. Make sure the inner space is the same length or slightly longer than the bearing stops in the hub or carrier.  Wheel Hub: Clean the hub, removing any dirt and corrosion. Make certain not to remove metal. This will adversely affect bearing fit. Outer Wheel Spacers: Clean the outer wheel spacers and inspect them for wear on either end as well as wear on the outer surface where it makes contact with the seal. If the spacers are excessively worn they should be replaced. Bearing Installation Note 1: Improper installation can cause bearing damage and dramatically reducing bearing life. Note 2: Heating the wheel hub will cause the hub to expand slightly and will make bearing installation easier.
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 25-1386 -
Bike Care
Wheel Bearing Kit (1393) – Rear
Wheel Bearing Kit (1393) – Rear
Wheel Bearings Kit All Balls Racing Wheel Bearings feature High-Speed bearings that are manufactured to ABEC 3 precision levels, triple lip rubber seals that keep the grease in and the water and dirt out all while utilising a Chevron SRI 2 grease that contains rust and oxidation inhibitors. Installation Inspection Inner Spacer: Check the bore to make certain it is clean and the axle easily passes through it. Check each end for wear and burrs. The edges must be square to seat properly against the new bearings. If the old bearings failed it is a good idea to confirm that the centre spacer has not been damaged. Make sure the inner space is the same length or slightly longer than the bearing stops in the hub or carrier.  Wheel Hub: Clean the hub, removing any dirt and corrosion. Make certain not to remove metal. This will adversely affect bearing fit. Outer Wheel Spacers: Clean the outer wheel spacers and inspect them for wear on either end as well as wear on the outer surface where it makes contact with the seal. If the spacers are excessively worn they should be replaced. Bearing Installation Note 1: Improper installation can cause bearing damage and dramatically reducing bearing life. Note 2: Heating the wheel hub will cause the hub to expand slightly and will make bearing installation easier.
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 25-1393 -
Bike Care
Wheel Bearing Kit (1402)
Wheel Bearing Kit (1402)
Wheel Bearings Kit All Balls Racing Wheel Bearings feature High-Speed bearings that are manufactured to ABEC 3 precision levels, triple lip rubber seals that keep the grease in and the water and dirt out all while utilizing a Chevron SRI 2 grease that contains rust and oxidation inhibitors. Installation Inspection Inner Spacer: Check the bore to make certain it is clean and the axle easily passes through it. Check each end for wear and burrs. The edges must be square to seat properly against the new bearings. If the old bearings failed it is a good idea to confirm that the center spacer has not been damaged. Make sure the inner space is the same length or slightly longer than the bearing stops in the hub or carrier.  Wheel Hub: Clean the hub, removing any dirt and corrosion. Make certain not to remove metal. This will adversely affect bearing fit. Outer Wheel Spacers: Clean the outer wheel spacers and inspect them for wear on either end as well as wear on the outer surface where it makes contact with the seal. If the spacers are excessively worn they should be replaced. Bearing Installation Note 1: Improper installation can cause bearing damage and dramatically reduce bearing life. Note 2: Heating the wheel hub will cause the hub to expand slightly and will make bearing installation easier. DESCRIPTION QTY PER KIT Ball Bearing 2 Seal 2 Installation Manual
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 25-1402 -
Bike Care
Wheel Bearing Kit (1403)
Wheel Bearing Kit (1403)
Wheel Bearings Kit All Balls Racing Wheel Bearings feature High-Speed bearings that are manufactured to ABEC 3 precision levels, triple lip rubber seals that keep the grease in and the water and dirt out all while utilizing a Chevron SRI 2 grease that contains rust and oxidation inhibitors. Installation Inspection Inner Spacer: Check the bore to make certain it is clean and the axle easily passes through it. Check each end for wear and burrs. The edges must be square to seat properly against the new bearings. If the old bearings failed it is a good idea to confirm that the center spacer has not been damaged. Make sure the inner space is the same length or slightly longer than the bearing stops in the hub or carrier.  Wheel Hub: Clean the hub, removing any dirt and corrosion. Make certain not to remove metal. This will adversely affect bearing fit. Outer Wheel Spacers: Clean the outer wheel spacers and inspect them for wear on either end as well as wear on the outer surface where it makes contact with the seal. If the spacers are excessively worn they should be replaced. Bearing Installation Note 1: Improper installation can cause bearing damage and dramatically reduce bearing life. Note 2: Heating the wheel hub will cause the hub to expand slightly and will make bearing installation easier. DESCRIPTION QTY PER KIT Ball Bearing 2 Seal 2 Installation Manual
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 25-1403 -
Bike Care
Wheel Bearing Kit (1405)
Wheel Bearing Kit (1405)
Wheel Bearings Kit All Balls Racing Wheel Bearings feature High-Speed bearings that are manufactured to ABEC 3 precision levels, triple lip rubber seals that keep the grease in and the water and dirt out all while utilising a Chevron SRI 2 grease that contains rust and oxidation inhibitors. Installation Inspection Inner Spacer: Check the bore to make certain it is clean and the axle easily passes through it. Check each end for wear and burrs. The edges must be square to seat properly against the new bearings. If the old bearings failed it is a good idea to confirm that the centre spacer has not been damaged. Make sure the inner space is the same length or slightly longer than the bearing stops in the hub or carrier.  Wheel Hub: Clean the hub, removing any dirt and corrosion. Make certain not to remove metal. This will adversely affect bearing fit. Outer Wheel Spacers: Clean the outer wheel spacers and inspect them for wear on either end as well as wear on the outer surface where it makes contact with the seal. If the spacers are excessively worn they should be replaced. Bearing Installation Note 1: Improper installation can cause bearing damage and dramatically reducing bearing life. Note 2: Heating the wheel hub will cause the hub to expand slightly and will make bearing installation easier.
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 25-1405 -
Bike Care
Wheel Bearing Kit (1406)
Wheel Bearing Kit (1406)
Wheel Bearings Kit All Balls Racing Wheel Bearings feature High-Speed bearings that are manufactured to ABEC 3 precision levels, triple lip rubber seals that keep the grease in and the water and dirt out all while utilising a Chevron SRI 2 grease that contains rust and oxidation inhibitors. Installation Inspection Inner Spacer: Check the bore to make certain it is clean and the axle easily passes through it. Check each end for wear and burrs. The edges must be square to seat properly against the new bearings. If the old bearings failed it is a good idea to confirm that the centre spacer has not been damaged. Make sure the inner space is the same length or slightly longer than the bearing stops in the hub or carrier.  Wheel Hub: Clean the hub, removing any dirt and corrosion. Make certain not to remove metal. This will adversely affect bearing fit. Outer Wheel Spacers: Clean the outer wheel spacers and inspect them for wear on either end as well as wear on the outer surface where it makes contact with the seal. If the spacers are excessively worn they should be replaced. Bearing Installation Note 1: Improper installation can cause bearing damage and dramatically reducing bearing life. Note 2: Heating the wheel hub will cause the hub to expand slightly and will make bearing installation easier.
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 25-1406 -
Bike Care
Wheel Bearing Kit (1415) Front
Wheel Bearing Kit (1415) Front
Wheel Bearings Kit All Balls Racing Wheel Bearings feature High-Speed bearings that are manufactured to ABEC 3 precision levels, triple lip rubber seals that keep the grease in and the water and dirt out all while utilizing a Chevron SRI 2 grease that contains rust and oxidation inhibitors. Installation Inspection Inner Spacer: Check the bore to make certain it is clean and the axle easily passes through it. Check each end for wear and burrs. The edges must be square to seat properly against the new bearings. If the old bearings failed it is a good idea to confirm that the center spacer has not been damaged. Make sure the inner space is the same length or slightly longer than the bearing stops in the hub or carrier.  Wheel Hub: Clean the hub, removing any dirt and corrosion. Make certain not to remove metal. This will adversely affect bearing fit. Outer Wheel Spacers: Clean the outer wheel spacers and inspect them for wear on either end as well as wear on the outer surface where it makes contact with the seal. If the spacers are excessively worn they should be replaced. Bearing Installation Note 1: Improper installation can cause bearing damage and dramatically reduce bearing life. Note 2: Heating the wheel hub will cause the hub to expand slightly and will make bearing installation easier. DESCRIPTION QTY PER KIT Ball Bearing 2 Seal 2 Installation Manual
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 25-1415 -
Bike Care
Wheel Bearing Kit (1420) – Rear
Wheel Bearing Kit (1420) – Rear
Wheel Bearings Kit All Balls Racing Wheel Bearings feature High-Speed bearings that are manufactured to ABEC 3 precision levels, triple lip rubber seals that keep the grease in and the water and dirt out all while utilizing a Chevron SRI 2 grease that contains rust and oxidation inhibitors. Installation Inspection Inner Spacer: Check the bore to make certain it is clean and the axle easily passes through it. Check each end for wear and burrs. The edges must be square to seat properly against the new bearings. If the old bearings failed it is a good idea to confirm that the center spacer has not been damaged. Make sure the inner space is the same length or slightly longer than the bearing stops in the hub or carrier.  Wheel Hub: Clean the hub, removing any dirt and corrosion. Make certain not to remove metal. This will adversely affect bearing fit. Outer Wheel Spacers: Clean the outer wheel spacers and inspect them for wear on either end as well as wear on the outer surface where it makes contact with the seal. If the spacers are excessively worn they should be replaced. Bearing Installation Note 1: Improper installation can cause bearing damage and dramatically reduce bearing life. Note 2: Heating the wheel hub will cause the hub to expand slightly and will make bearing installation easier. DESCRIPTION QTY PER KIT Ball Bearing 2 Seal 2 Installation Manual
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 25-1420 -
Bike Care
Wheel Bearing Kit (1491) Front
Wheel Bearing Kit (1491) Front
Wheel Bearings Kit All Balls Racing Wheel Bearings feature High-Speed bearings that are manufactured to ABEC 3 precision levels, triple lip rubber seals that keep the grease in and the water and dirt out all while utilizing a Chevron SRI 2 grease that contains rust and oxidation inhibitors. Installation Inspection Inner Spacer: Check the bore to make certain it is clean and the axle easily passes through it. Check each end for wear and burrs. The edges must be square to seat properly against the new bearings. If the old bearings failed it is a good idea to confirm that the center spacer has not been damaged. Make sure the inner space is the same length or slightly longer than the bearing stops in the hub or carrier.  Wheel Hub: Clean the hub, removing any dirt and corrosion. Make certain not to remove metal. This will adversely affect bearing fit. Outer Wheel Spacers: Clean the outer wheel spacers and inspect them for wear on either end as well as wear on the outer surface where it makes contact with the seal. If the spacers are excessively worn they should be replaced. Bearing Installation Note 1: Improper installation can cause bearing damage and dramatically reduce bearing life. Note 2: Heating the wheel hub will cause the hub to expand slightly and will make bearing installation easier. DESCRIPTION QTY PER KIT Ball Bearing 2 Seal 2 Installation Manual
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 25-1491
