General Accessories

BMW S1000RR Styling – LED Smoke Rear Light

LED Smoke Rear Light : The lightweight, secure replacement for the original taillight. Facts: Much more effective signalling effect as there is no delay when they are switched on Easy conversion without further changes – simply replace original Complete, ready to install E-approval (further registration is not required) This product fits to : S 1000 R (2014 – ) S 1000 RR ( – 2011) S 1000 RR (2012 – 2014) S 1000 RR (2015 – ) Brand : Wunderlich Germany Part Number : WL 44330-000

Key Features

• High-quality construction
• Durable
• Easy installation

BMW S1000RR Styling – Tail Tidy

Number Plate Carrier Legere Vario – Black : Fully adjustable number plate carrier. The carrier can be adjusted in terms of tilt and proximity to the rear wheel. The plate carrier can also be shifted upwards, bringing it almost level with the tail. Can be combined with the original tail, rear light and indicators, as well as the race hump (without the original rear light) and Kellermann LED indicators (with integrated tail/brake lights) The facts: The hole pattern of the original plate carrier has been retained Laser cut, anodised aluminium TÃœV certifaction is not requiered This product fits to : S 1000 R (2014 – ) S 1000 RR ( – 2011) S 1000 RR (2012 – 2014) S 1000 RR (2015 – ) Brand : Wunderlich Germany Part Number : WL 36090-002 MANUAL

Key Features

• High-quality construction
• Durable
• Easy installation

BMW SIDE VIEW – REPLACEMENT MIRROR

The dimensions and design of these mirrors correspond to OEM quality. This makes these mirrors fully compatible with the series mirrors. So if the mirrors have been damaged and have to be replaced, this mirror set is the perfect first choice! The facts: Function Mirror set, compatible with the series mirrors Set of mirrors for right and left Technical information: Dimensions: Width including mirror arm: 300 mm Mirror width: 90 mm Mirror height 51 mm

Key Features

• High-quality construction
• Durable
• Easy installation

BMW Styling – Frame Protection Cover Caps

BMW Styling – Frame Protection Cover Caps – 5 Piece : These caps neatly close the unsightly openings in the frame. This means no unwanted dirt or moisture can accumulate and gives the frame of the BMW a visual upgrade. The frame caps are made of high-quality and resistant hard rubber Material: High-quality, resistant hard rubber Dirt and rust build-up are thus avoided Perfect fit and firm, secure seat Quick and easy to attach Visual upgrade Manual

Key Features

• High-quality construction
• Durable
• Easy installation

BMW Styling – Tele-lever Aluminum Cover

Just the right finishing touch for the technically elaborate and high-quality finished Telelever system. The facts: Crowning glory for the telelever system. Considerably more stable and resistant to oxidation. Secure locking with set screw. Simple exchange for original plastic cap. Made entirely from CNC turned/milled aluminium. Anodised silver. Made in Germany.. The brittle and cheap looking original plastic cover usually flies off anyway – the exposed and quickly oxidisingbolt is not exactly an attractive alternative either.

Key Features

• High-quality construction
• Durable
• Easy installation

BMW Styling R Series – Fork Tube Covers

Small highlights keep the friendship and the pleasure you have with your BMW alive. It is simply more fun to look at high-quality objects.This replacement for the conspicuous rubber caps give the top yoke a touch of class. The precise fabrication ensures outstanding sealing qualities. A brief story from the development process: In order for the cap to be mounted at all, ventilation drill holes had to be incorporated to release the excessive pressure during insertion. O-rings have been integrated for optimal sealing. Machined from single-piece aluminium with high-quality coating. Complete set.

Key Features

• High-quality construction
• Durable
• Easy installation

Caliper Rebuild Kit Front (18-3112)

Caliper Rebuild Kit: The All Balls Caliper Rebuild Kit contains all of the components required to re-furbish one’s caliper. Kit contains all of the components to re-seal caliper; Would include the necessary copper washers, cup seals, replacement screws where applicable, and O-rings etc where applicable Sold as a complete kit by position. Note: Kit contents will vary by fitment and are subject to change.

Key Features

• High-quality construction
• Durable
• Easy installation

CamRack with Advanced Front-Lighting System

Fits in combination with the adaptive cornering light. The CamRack is a bracket that positions the camera in front of the windshield, keeping the camera free of vibrations and providing unshakeable hold and which sits as close to the centre of gravity of the ‘rider machine’ grounding system – only by doing so can the fluctuations along the vehicle’s transverse axis (‘pitching’ motions) be kept in check while riding. The CamRack meets these requirements perfectly. It attaches to the solid attachment points on the windshield, i.e. a sturdy pipe structure, that has been designed by BMW for absorbing the highest wind pressure forces. This means that the CamRack sits here free of vibrations with an unshakably firm hold. The CamRack is attached using the screws and plastic washers supplied in the set, thus avoiding any damage to the windshield. Facts Function Motorcycle-specific camera bracket Compatible with GoPro / GoPro Hero and similar cameras Absolutely stable camera execution Design harmoniously adapted to motorcycle type Unshakably stable and absolutely vibration-free Delivery including all mounting parts Simple assembly on the original points Technical info CNC-milled aluminum

Key Features

• High-quality construction
• Durable
• Easy installation

Chain Roller (5001)

It is a Quality Chain Roller Kit from All Balls Racing. Hi-performance rollers for replacement of OE chain rollers. The universal 34mm and 38mm Polyurethane chain rollers have a 98A Durometer hardness for long life and feature sealed precision bearings with two additional outer seals to prevent water and dirt from contaminating the bearings. They are the longest lasting chain roller in the industry. The OE replacement chain rollers that mount directly to a frame boss are made from hi-performance self lubricating nylon. Sold as a complete kit by position. Note: Kit contents will vary by fitment and are subject to change.

Key Features

• High-quality construction
• Durable
• Easy installation

Chain Roller (5014)

It is a Quality Chain Roller Kit from All Balls Racing. Hi-performance rollers for replacement of OE chain rollers. The universal 34mm and 38mm Polyurethane chain rollers have a 98A Durometer hardness for long life and feature sealed precision bearings with two additional outer seals to prevent water and dirt from contaminating the bearings. They are the longest lasting chain roller in the industry. The OE replacement chain rollers that mount directly to a frame boss are made from hi-performance self lubricating nylon. Sold as a complete kit by position. Note: Kit contents will vary by fitment and are subject to change.

Key Features

• High-quality construction
• Durable
• Easy installation

Clutch Slave Cylinder Rebuild Kit (6003)

Spare – Clutch Slave Cylinder Rebuild Kit Kit contains all of the components required to properly rebuild the swing arm bearing assembly.Needle bearing shafts are made with SCM415/42 bearing steel that has been hardened and precision ground.All metal bushings are case hardened and plated to prevent wear and corrosion.POM composite washer bearings replace thruneedle washers fincreased service life and superiresistance to water and dirt. Replaces your leaky or worn slave cylinder Includes all seals necessary to rebuild your Slave Cylinder OEM Replacement

Key Features

• High-quality construction
• Durable
• Easy installation

Clutch Slave Cylinder Rebuild Kit (6016)

Spare – Clutch Slave Cylinder Rebuild Kit Kit contains all of the components required to properly rebuild the swing arm bearing assembly.Needle bearing shafts are made with SCM415/42 bearing steel that has been hardened and precision ground.All metal bushings are case hardened and plated to prevent wear and corrosion.POM composite washer bearings replace thruneedle washers fincreased service life and superiresistance to water and dirt. Replaces your leaky or worn slave cylinder Includes all seals necessary to rebuild your Slave Cylinder OEM Replacement

Key Features

• High-quality construction
• Durable
• Easy installation