Posi-Products

Posi Lock® Connector

VIBRATION PROOF HIGH TEMP REUSABLE Posi-Lock® Connectors with a cost savings! Posi – Lock covers the majority of uses on a motorcycle like splicing wires together for auxiliary lights, horn relays, LED brake lights, and more. They are reusable, vibration proof and can be used at high temperatures; they meet the SAE standards. The Posi-Lock Connectors make wire splicing a cinch, and the connection the Posi-Lock makes is really solid. You unscrew the two threaded ends from the central connector and insert the wires, screw them back on and you’re done! The central barrel-shaped connector has a metal conductor running through it, and when you screw on the ends, the wire is forced against the metal to make the connection. No metal part 100% Nylon 66 Resistance is 80% Less than crimp connectors Easy and quick to use Lesser chances of loose connection Removable Both Ends Swivel Max Temp 120 deg centigrade Max 600 VAC / DC

Key Features

• High-quality construction
• Durable
• Easy installation

Posi Seal® Connector

Posi Seal Connectors deliver superior in-line splices with just hand tightening. These electrical connectors require no crimping and are reusable. VIBRATION PROOF HIGH TEMP REUSABLE Posi-Seal® Connectors are weather tight The Posi-ealSConnectors make wire splicing a cinch, and the connection the Posi-Lock makes is really solid. You unscrew the two threaded ends from the central connector and insert the wires, screw them back on and you’re done! The central barrel-shaped connector has a metal conductor running through it, and when you screw on the ends, the wire is forced against the metal to make the connection. No metal part 100% Nylon 66 Resistance is 80% Less than crimp connectors Easy and quick to use Lesser chances of loose connection Removable Both Ends Swivel Weather tight Max Temp 120 deg centigrade Max 600 VAC / DC – Refer image chart for details

Key Features

• High-quality construction
• Durable
• Easy installation

Posi Tap® Connector (0.75 sqmm)

Electrical Connector – Posi-Tap® Posi-Tap® connectors allows you to tap into wires without cutting! Total wire integrity is maintained Installs in seconds by hand – No crimping or tools required Reusable or permanent Less resistance Vibration proof Fully insulated Powers up to 4 leads at once! POSI-TAP Connector meet or exceeds: SAEJ1211 Section 3.2.3 Salt Spray Test Section 3.2.4 Immersion & Splash Test Section 3.2.5 Dust, Sand & Gravel Test Section 3.2.7 Mechanical Vibration Section 3.2.8 Mechanical Shock Section 3.2.1 Temperature Test Types Available in Posi-Tap® Line Tap 0.75 sq.mm (18 ga) Straight Mini Type Tapered Posi-Tap Installation Instructions Note: Regular Posi-Lock Products install the same way as the small cap of the Posi-Tap. Click here to see how to install a regular Posi-Lock. Note: Larger Posi-Locks require 1/2″ of stripped wire, and smaller ones require 3/8″ of wire to be stripped. These photos show a Posi-Tap 1824, which requires 3/8″ stripped on the tapping wire only. The tapped wire is not stripped.

Key Features

• High-quality construction
• Durable
• Easy installation

Posi Tap® Connector (2.5-1.5sqmm)

Electrical Connector – Posi-Tap® Posi-Tap® connectors allows you to tap into wires without cutting! Total wire integrity is maintained Installs in seconds by hand – No crimping or tools required Reusable or permanent Less resistance Vibration proof Fully insulated Powers up to 4 leads at once! POSI-TAP Connector meet or exceeds: SAEJ1211 Section 3.2.3 Salt Spray Test Section 3.2.4 Immersion & Splash Test Section 3.2.5 Dust, Sand & Gravel Test Section 3.2.7 Mechanical Vibration Section 3.2.8 Mechanical Shock Section 3.2.1 Temperature Test Taps 2.5 – 1.5 sq mm and Accessory lead 0.25-0.75 sq mm Posi-Tap Installation Instructions Note: Regular Posi-Lock Products install the same way as the small cap of the Posi-Tap. Click here to see how to install a regular Posi-Lock. Note: Larger Posi-Locks require 1/2″ of stripped wire, and smaller ones require 3/8″ of wire to be stripped. These photos show a Posi-Tap 1824, which requires 3/8″ stripped on the tapping wire only. The tapped wire is not stripped. Here is a side view showing the point that pierces the wire for the tap. Remove this large cap and the smaller cap. Start by inserting fully the wire to be tapped as shown in the next photo below. Slide the large cap over the wire as far as it will go. Here, the wire to be tapped is inserted and ready to tap. Here the tap is started carefully onto the threads of the large cap. Make sure the pin is centred on the wire when the pin contacts the wire. Keep the Posi-Tap straight to do this. Continue to thread by hand until the wire is tightly tapped. Now, complete the Posi-Tap install, by stripping and installing the tapping wire, as shown below.

Key Features

• High-quality construction
• Durable
• Easy installation

Posi Twist® Connector

VIBRATION PROOF HIGH TEMP REUSABLE Used for connecting multiple wires together ( no need to solder) When in-line connections are not needed. Posi-Twistâ„¢ Connectors deliver the same superior connection as Posi-Lock® Connectors with a cost savings! Similar function to a screw-on wire connector You can use the bigger diameter Posi-Twist connectors to connect several wires together or multiple gauge wires. No metal part 100% Nylon 66 Resistance is 80% Less than crimp connectors Easy and quick to use Lesser chances of loose connection Removable Reusable

Key Features

• High-quality construction
• Durable
• Easy installation