Posi Tap® Connector (0.75 sqmm)
Posi Tap® Connector (0.75 sqmm)
Electrical Connector – Posi-Tap® Posi-Tap® connectors allows you to tap into wires without cutting! Total wire integrity is maintained Installs in seconds by hand – No crimping or tools required Reusable or permanent Less resistance Vibration proof Fully insulated Powers up to 4 leads at once! POSI-TAP Connector meet or exceeds: SAEJ1211 Section 3.2.3 Salt Spray Test Section 3.2.4 Immersion & Splash Test Section 3.2.5 Dust, Sand & Gravel Test Section 3.2.7 Mechanical Vibration Section 3.2.8 Mechanical Shock Section 3.2.1 Temperature Test Types Available in Posi-Tap® Line Tap 0.75 sq.mm (18 ga) Straight Mini Type Tapered Posi-Tap Installation Instructions Note: Regular Posi-Lock Products install the same way as the small cap of the Posi-Tap. Click here to see how to install a regular Posi-Lock. Note: Larger Posi-Locks require 1/2″ of stripped wire, and smaller ones require 3/8″ of wire to be stripped. These photos show a Posi-Tap 1824, which requires 3/8″ stripped on the tapping wire only. The tapped wire is not stripped.
Key Features
- High-quality construction
- Durable
- Easy installation
₹169.00
Posi Tap® Connector (0.75 sqmm)
Electrical Connector – Posi-Tap® Posi-Tap® connectors allows you to tap into wires without cutting! Total wire integrity is maintained Installs in seconds by hand – No crimping or tools required Reusable or permanent Less resistance Vibration proof Fully insulated Powers up to 4 leads at once! POSI-TAP Connector meet or exceeds: SAEJ1211 Section 3.2.3 Salt Spray Test Section 3.2.4 Immersion & Splash Test Section 3.2.5 Dust, Sand & Gravel Test Section 3.2.7 Mechanical Vibration Section 3.2.8 Mechanical Shock Section 3.2.1 Temperature Test Types Available in Posi-Tap® Line Tap 0.75 sq.mm (18 ga) Straight Mini Type Tapered Posi-Tap Installation Instructions Note: Regular Posi-Lock Products install the same way as the small cap of the Posi-Tap. Click here to see how to install a regular Posi-Lock. Note: Larger Posi-Locks require 1/2″ of stripped wire, and smaller ones require 3/8″ of wire to be stripped. These photos show a Posi-Tap 1824, which requires 3/8″ stripped on the tapping wire only. The tapped wire is not stripped.
Key Features
- High-quality construction
- Durable
- Easy installation
There are no reviews yet.