All Item Groups
Showing 265–288 of 7038 results
-
Sidestand Foot Enlargers
BMW F Series Ergonomics – Side Stand Enlargement
BMW F Series Ergonomics – Side Stand Enlargement
BMW F Series Side Stand Enlargement When you are fully packed, or on an unstable ground; the motorcycle threatens to sink easily on the side stand. This precisely shaped milled spreading plate, which is quickly screwed to the side stand would help secure the bike by increasing the surface area of your side stand! More than 100% larger surface area Safe stand of the machine on all surfaces Oxidation-proof black anodised 100% German made and designed Highly scratch resistant, due to hard coat finishing Single pc machined to take the load of the bike
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 25855-002 -
Side Carriers
BMW F Series GS Carrier – Side Carrier (CUTOUT)
BMW F Series GS Carrier – Side Carrier (CUTOUT)
The rack is 100% tubed german steel and plastic powder coated Stress tested and stainless steel 100% designed and made in Germany It is made specifically to fit this bike for the Cutout cases They look good when the luggage is not mounted and also protect the bike from damage They can be conveniently paired with the top case racks, enlargement, etc racks by Hepco Becker without any need for modification. You can refer to the installation manual for a quick peek on how it would be installed on your motorcycle. As a standard Hepco Becker Policy:- The mounting points used are the existing ones on the bike so no alteration needs to be done on the bike. All necessary bolts and parts are included in the kit. Like most Hepco Becker Installations, the installation manual would suggest how easy it is to install the parts on your own. Most of the carriers can be installed with the side case carriers. Just to be sure you could double check by taking a peak at the installation manual of this particular part! All products are backed up Hepco Becker 5 year support Includes:- The Carrier (both sides) and all the necessary screws and bolts for its installation so nothing else would be needed to install the Hepco Becker Side cases measurements outside (HxWxD) cm: 39 x 50 x 31 cm / 39 x 50 x 31-24 inner measurements (HxWxD) cm: 32 x 39,5 x 26,5 cm / 32 x 39,5 x 26,5-19,5 cm
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 6516513 00 22 -
Side Carriers
BMW F Series GS Carrier – Side Carrier (Quick Lock)
BMW F Series GS Carrier – Side Carrier (Quick Lock)
The rack is 100% tubed german steel and plastic powder coated Stress tested and reinforced steel 100% designed and made in Germany It is made specifically to fit this bike for the Hepco Becker Side cases. They look good when the luggage is not mounted and also protect the bike from damage They can be conveniently paired with the top case racks, enlargement, etc racks by Hepco Becker without any need for modification. You can refer to the installation manual for a quick peek on how it would be installed on your motorcycle. Quick Release “Lock It†; easily removable and quick release mechanism :- The carriers can be installed and removed within seconds by loosening the lock-it screws (quarter turn). You can remove the side parts backwards or sideways. A For Quick release as an optional accessory you can buy the theft proof lock and key As a standard Hepco Becker Policy:- The mounting points used are the existing ones on the bike so no alteration needs to be done on the bike. All necessary bolts and parts are included in the kit. Like most Hepco Becker Installations, the installation manual would suggest how easy it is to install the parts on your own. Most of the carriers can be installed with the side case carriers. Just to be sure you could double check by taking a peak at the installation manual of this particular part! All products are backed up Hepco Becker 5 year support Fits:- Hepco Becker Side hard cases Suitable as a carrier for aftermarket soft cases Includes:- The Carrier (both sides) and all the necessary screws and bolts for its installation so nothing else would be needed to install the Hepco Becker Side cases Finishes available in Side Carries systems:- Black Powder coated for ADV Bikes Chrome for Classic Variants .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; } Part Number:- 6506513 00 01 Brand:- Hepco Becker Germany
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 6506513 00 01 -
Sidestand Foot Enlargers
BMW F Series GS Ergonomics – Side Stand Enlargement
BMW F Series GS Ergonomics – Side Stand Enlargement
The additional safeguard for the factory-lowered F 850 or F 750 GS: Especially when fully loaded or on an unsecured surface, the F 850/750 GS can easily drop on the side stand. The precision milled extension plate quickly screws onto the side stand and frees the GS of this danger. The facts: High machine stability on all surfaces Over 100% larger contact area Eight mm thick Dural aluminium Oxidation-proof black anodised Rustproofing for original contact area Milled groove for original contact equipped with foam rubber to dampen vibrations CNC-milled Easy fitting MANUAL
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 25855-102 -
Ergonomics
BMW F Series GS Ergonomics – Tank Pad
BMW F Series GS Ergonomics – Tank Pad
Wunderlich Tank Pad set 3 pieces – Black : The three-piece tankpad set is designed to match the design of the GS. The pads effectively protect against scratches, damage and abrasion at all contact points. The side pads improve knee closure and provide a more direct contact to the bike through increased adhesion. This significantly increases the driving experience and driving pleasure. The material consists of high-quality and non-slip black plastic, is shock-absorbing and slightly grained. The pads are self-adhesive. The facts: Function Suitably matched to the BMW F 750/850 GS Effective protection against scratches The effective center pad protects against zipper scratches Provides excellent grip, better knee closure, more driving feel and driving fun Excellent shock absorption performance Remains dimensionally stable even at extreme temperatures Resistant to almost all chemicals UV-resistant Specifications Material: Semi-rigid integral polyurethane foam Thickness: 4mm Installation Manual
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 28071-000 -
Fenders
BMW F Series GS Plastics – Rear Hugger
BMW F Series GS Plastics – Rear Hugger
Rear Hugger F Series GS GSA – Black : The series-produced rear hugger for the XR is somewhat undersized. Wet asphalt can heavily soil your bike’s tail, swing arm, and more. We have skillfully extended this cover and pulled it down slightly to the side. This provides an even more understated but significantly more effective protection for the strut, tail, and other components from street dirt and rain, significantly reducing tricky cleaning tasks. Made of 4mm colored plastic. First-class fit and easy installation
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 20481-000 -
Protection
BMW F Series GS Protection – Caliper Brake Guard ( Front)
BMW F Series GS Protection – Caliper Brake Guard ( Front)
BMW F 750 / 850 GS / 850 GSA Protection – Front Caliper Brake Guard: Solid protective cover for the “brembo” brake callipers of the F 750/850 GS and 850 GS Adventure. They provide reliable protection against mechanical stress and integrate into the sporty design of the GS. The high protective effect is the result of the stiffness of the 3D edged aluminium component with milled openings. This leaves the superior “brembo” logo on the brakes clearly visible. Our cover securely and reliably frames the exposed brake callipers as well as the hose connections with its clean two-point attachment. This reliably reduces the threat of damage to the brake callipers especially during vigorous off-road use. The protection mounts easily using the two existing and easily accessible attachment points on the fork. Function Solid all-around protection for the exposed brake callipers Durable construction High-quality design Easy to mount Complete with attachment set Technical info Material: High-quality stainless steel, precision 3D edged, precise, fitted form, milled openings, black powder-coated MANUAL
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 27071-002 -
Protection
BMW F SERIES GS Protection – Engine Crash Bars “EXTREME”
BMW F SERIES GS Protection – Engine Crash Bars “EXTREME”
The life insurance for the engine of the F 850 GS. The crash bar reliably protects the engine and parts of the fairing in the worst case scenario. The facts: Perfect protection for the engine and parts of the fairing With diagonal strut for uniform distribution of the forces over 6 attachment points No restriction of ground clearance Plug-n-Play fit and assembly. Guaranteed! Minimal weight Maintenance work is possible without removing the crash bar Plastic-coated precision steel pipe Detailed yet easy-to-understand instructions Incl. installation material Made in Germany View Instruction Manual
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 26550-202 -
Protection
BMW F Series GS Protection – Engine Guard
BMW F Series GS Protection – Engine Guard
BMW F Series GS Protection – Engine Crash Bar “Extreme” : Whether you ride more on rugged terrain, on country roads or in town; a Hepco & Becker guard does the protection for your motorcycle. Follow the lines of the bike perfectly, giving it a customized appearance. Like all Hepco Becker products:- 100% stable tube-in-tube German construction 1 Inch bars :- strong enough to protect and still not add weight Stress tested for the optimum protections Strong sturdy multiple point mounting Premium surface finish of black powder coating Easy assembly, instructions included High quality german steel tube
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 5016513 00 01 -
Protection
BMW F Series GS Protection – Headlight Protector (Foldable)
BMW F Series GS Protection – Headlight Protector (Foldable)
Lamp Protection Grill | Fold-able : A stone flying up or taking a short off-road route can often result in the expensive destruction of the head lamp. Our foldable light protection grille protects the head lamp in all situations. The facts: Great protection for the original head lamp No reflections or risk of glare to the rider Head lamp and grille are easy to clean (simply fold up) Robust, powder-coated design made of stainless steel Easy to fit Incl. attachments Made in Germany Note: Only permitted for sports use when folded up.
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 25851-102 -
Protection
BMW F Series GS Protection – Tank Guard
BMW F Series GS Protection – Tank Guard
BMW F 750GS & 850 Protection – Tank Guard’ Whether you ride more on rugged terrain, on country roads or in town; a Hepco & Becker guard does the protection for your motorcycle. Follow the lines of the bike perfectly, giving it a customized appearance. Like all Hepco Becker products:- 100% stable tube-in-tube German construction 1 Inch bars :- strong enough to protect and still not add weight Stress tested for the optimum protections Strong sturdy multiple point mounting Premium surface finish of black powder coating Easy assembly, instructions included High quality german steel tube 5 Year Hepco Becker Support
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 5026513 00 22 -
Protection
BMW F Series GS Protection – Water Cooler Protection “Extreme”
BMW F Series GS Protection – Water Cooler Protection “Extreme”
Wunderlich Water Cooler Protection – Black : The water cooler is perfectly positioned for the on-rushing air stream, so that anything being carried by this stream finds its way into the cooler. Stones cause damage, while insects and other types of grime accumulate in the delicate fins. Cleaning is an extremely laborious process and requires lots of elbow grease. The cooler protection’s positioned fins provide optimum air throughput and reliably prevent items from hitting the cooler directly. Our water cooler protection is also a visual highlight: The black cooler surfaces disappear and the actual cooler opening is impressively accentuated. Even though the F 750 GS already has discreet water cooler protection as standard, ours offers a great deal more in terms of both impact and appearance. The facts about the Wunderlich water cooler protection: Perfect cooler protection and fantastic finish Blocks all destructive elements from reaching the cooler Intricately manufactured: Follows the cooler’s curve exactly Sturdy protection made of powder-coated aluminium Quick and easy to fit Comes with mounting material and detailed installation instructions Made in Germany Tip: Insects and other grime which has accumulated can be easily removed with a damp cloth. Place the cloth on the grille for approximately 30 minutes so that the dirt can be penetrated with moisture and then removed easier. MANUAL
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 25854-002 -
Windscreen
BMW F Series GS Screen – Windscreen Marathon
BMW F Series GS Screen – Windscreen Marathon
BMW F 750GS * 850 Screen – Windscreen Marathon Sophisticated touring comfort for long, unencumbered tours. Wind protection and comfort are “state of the art” here. A screen that offers maximum wind protection and integrates perfectly into the overall vehicle layout in visual terms. Difference between the Marathon and the Extreme is that the area that is covered in front of the guards! Both are Width: 350mm Height: 460mm For models with a standard windshield (long holder from factory). For models with a small windshield (short holder from factory). The facts: Maximum protection for head, upper body and arms. Significantly higher and considerably widened over the whole area. The vehicle design is consistently accommodated in every line and the screen thus integrates perfectly into the overall appearance. Very robust, optically pure and petrol-resistant PMMA acrylic plastic. Width: 350 mm Height: 460 mm With ABE
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 20230-204 -
Protection
BMW F Series GSA Protection – Headlight Protector (Foldable)
BMW F Series GSA Protection – Headlight Protector (Foldable)
Just one stone thrown up from the road and/or a short off-road excursion can spell the costly end for the original headlight. The usual, stiff headlight grilles or the original protective screen are not approved for road use and the headlight lens behind it is difficult to clean. Our foldable grille or screen protects the headlight in all instances and can then be folded upwards when riding on the road or for cleaning purposes. The facts High protection for the headlight. No reflections or risk of glare. Easy cleaning of headlight and acrylic screen. Folds up reliably for road use. Quickly folds back down for off-road use. Easy fitting. Robust, coated construction. Technical data Material: Transparent acrylic glass Frame: Stainless steel, black powder-coated Dimensions (WxH): 275mm x 170 mm Material thickness: 3mm
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 25858-102 -
Protection
BMW F Series Protection – Clutch And Alternator Cover
BMW F Series Protection – Clutch And Alternator Cover
BMW F Series Protection – Clutch And Alternator Cover: The two highly complexly designed engine covers for the alternator and the clutch are sensitive in the event of a mishap over terrain or a crash. We have developed a set of, light covers to protect the sensitive housing covers. They are uniquely characterised by their integrated, appealing design, which reliably protects vulnerable areas and simultaneously emphasises the design of the housing covers, and most importantly, leaving the superior BMW logo free and clear. The specialists from Grafschaft have designed the structure of the covers is so that mechanical stresses and force spikes are distributed evenly over the structure of the component. A moulded elastomer element made of silicone is fitted to the inside to provide additional dampening. This also seals the covers against the alternator and clutch covers so that dirt, moisture and dust are kept out. The covers can be mounted using the mounting kit provided in just a few minutes. The facts: Secure protection during falls, fall and mechanical stress Made of durable, impact-resistant special plastic Uniform distribution of force spikes across the component structure Integrated design, incorporates into the design of the vehicle With carefully worked in, inward-facing elastomer element for shock absorption, seal against moisture and dust Easy and quick installation Complete with attachment kit Technical information Material: High-quality, impact-resistant special plastic, precision manufactured with integrated shock-absorbing and sealing elements
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 26841-002 -
Protection
BMW F Series Protection – Ignition Protection Swtich
BMW F Series Protection – Ignition Protection Swtich
BMW F 750 / 850 GS /850GSA Protection – Ignition Protection Swtich: The switch, which reliably cuts the ignition whenever the side stand is folded out, certainly prevents a lot of grief. This is because riding off with the side stand folded out can have very unpleasant consequences for both rider and bike. It therefore makes sense to properly protect this exposed switch against damage from stone impacts or falls. After all, if the switch is damaged, the engine will no longer start. We replace the original plastic part with a solid component. The high level of protection is ensured by the stiffness of the angular, partially pierced 2mm aluminum plate. It surrounds the exposed switch with its sturdy two-point attachment and reliably protects it. This reliably reduces the risk of damage to the switch, especially during vigorous off-road use. The protective cover is simple to install using the two existing and easily accessible attachment points on the vehicle. Function Solid all-over protective cover for the exposed ignition interruption switch on the side stand Durable, sturdy construction High-quality, attractive design Easy to mount Technical data Material: Aluminum, high-quality craftsmanship, black anodized Material thickness 2mm Complete with mounting kit
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 25856-002 -
Protection
BMW F Series Protection – Skid Plate
BMW F Series Protection – Skid Plate
Aluminium Engine Bottom Protection Plate / Skid Plate for BMW F Series by Hepco Becker A slight rough contact with the ground and can damage the engine housing of you bike. This skid plate protects the manifold and engine block from violent ground contact or rock impact. HEPCO BECKER skid plates are designed for protection while making your bike look great! Solid premium aluminium skid plate 100 % MADE & DESIGNED IN GERMANY 3-4mm Thickness of the aluminium Perfect blend of gap between the Engine and Skid plate ensuring the the dents are absorbed between the gaps while ensuring the ground clearance is not reduced Made and designed as per the lines of the bike Adapted to fit the engine and exhaust system of the bike Instruction Manual
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 8106520 00 12 -
Protection
BMW F Series Protection – SKID PLATE (Euro 4)
BMW F Series Protection – SKID PLATE (Euro 4)
BMW F 750GS / 850GS / 850GSA Engine Protection Plate (Extreme): The flawless engine protection in a slim design for the F 750/850 GS / 850 GSA reliably protects the engine and manifold from damage. Due to the form and the resulting stiffness, it proved possible to significantly reduce the material thickness and thus also the weight. The facts: Aluminum engine protection molded in a hydroforming process Manufacturing process guarantees maximum stiffness and best possible protection Protects engine, manifold and front silencer Maximum ground clearance The design means snagging is impossible Additional carrier for complete impact decoupling between protector and engine housing Maintenance operations possible with no dismantling With inspection drill hole for oil drain screw Complete fitting kit Made in Germany View Instruction Manual
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 26840-302 -
Protection
BMW F Series Protection – SKID PLATE (Euro 5)
BMW F Series Protection – SKID PLATE (Euro 5)
BMW Engine Protection Plate (Extreme): The flawless engine protection in a slim design for the F Series reliably protects the engine and manifold from damage. Due to the form and the resulting stiffness, it proved possible to significantly reduce the material thickness and thus also the weight. The facts: Aluminum engine protection molded in a hydroforming process Manufacturing process guarantees maximum stiffness and best possible protection Protects engine, manifold and front silencer Maximum ground clearance The design means snagging is impossible Additional carrier for complete impact decoupling between protector and engine housing Maintenance operations possible with no dismantling With inspection drill hole for oil drain screw Complete fitting kit Made in Germany View Instruction Manual
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 26840-702 -
Protection
BMW F Series Protection – Switch Assistant
BMW F Series Protection – Switch Assistant
BMW F 750GS / 850GS / 850GSA Protection – Switch Assistant: Solid mechanical protection for the switching assistant of the F 750/850 GS with a design that makes it look very sporty and that integrates brilliantly into the design of the GS. The high protective effect is the result of the stiffness of the edged, partially pierced 2 mm aluminium plate. It surrounds the exposed, expensive switching assistant with its decent three-point attachment and reliably protects it. This reliably reduces the threat of damage to the switching assistant especially during vigorous off-road use. The protection mounts easily using the three existing and easily accessible attachment points on the vehicle. The facts: Function Solid all-round protection for the expensive and exposed switching assistant Durable construction High-quality design Easy mounting Technical info Aluminum, high-quality processed, anodized Material thickness 2mm Complete with attachment kit No German Type approval required Manual
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 26283-002 -
Protection
BMW F Series Styling – Frame Cover
BMW F Series Styling – Frame Cover
The two halves of the cover perfectly enclose the two side openings on the rear of the frame. Effectively captures or deflects dirt, stone strikes, splashback or spray kicked up before they reach the rider and passenger. Noticeably reduces dirt on the machine. The dynamic design achieved by the moulding remains discreet and looks inconspicuous and appealing on the motorbike. Assembly and disassembly are equally simple. The facts: Function Closes the side opening on the right and left of the rear frame Protects the rider and passenger from kicked up spray or road dirt Reduces dirt on the machine Appealing look Easy assembly Technical information Material: High-quality PP plastic (thermoplastic) Thickness: 3 millimetres Set consists of: Right and left frame cover, attachment material Colour: Black Dimensions: Width: 510 mm, height: 186 mm, component thickness: 3 mm Features Wunderlich premium product. Wunderlich design. Functional and integrated. Wunderlich product category Protection Design
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 20801-002 -
Ergonomics
BMW F-Series Ergonomics – Brake Lever “Variolever”
BMW F-Series Ergonomics – Brake Lever “Variolever”
Revolutionary in terms of ergonomics, handling and exclusivity: We have developed brake and clutch levers that can be optimally adjusted in length and width to best serve your individual needs.Simply unfasten the lever locking screw, and adjust the length according to your personal requirements. With the XR, for example, you’ll want more precise dosing with less hand force, i.e. reduced length. The VarioLever also allows you to brake with just two or three fingers, without clenching the remaining fingers. This also applies to the clutch hand.Of course, it’s possible to brake with all four fingers again when the lever is fully extended. A further novelty is the width adjustability, which can now be adjusted while the vehicle is moving – a feature that is of considerable importance when there is an erratic pressure point (e.g. in racing or heavy-duty usage).This is achieved by means of a large pivoting mechanism, which is easy to use, even when wearing thick gloves. The extraordinarily delicate construction is also extremely resilient:Even with a fully extended lever, loads of more than 60 kilos(!) can be transmitted without difficulty at the outermost contact point. High-strength aluminium (AL 7075 T6) which is the material of choice in the aerospace industry. Anodised. ABEcertified, registration is not required
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 35700-102 -
Accessories
BMW F-Series F 900 GS Adventure Navigator holder with windscreen adjustment
BMW F-Series F 900 GS Adventure Navigator holder with windscreen adjustment
The original holder for the original Navigator on the handlebar clamps may be really practical but it’s a hindrance when a tank bag is used. The navigation device collides with the tank bag when steering and limits the steering angle and thus the turning radius. The makes manoeuvring uncomfortable, more demanding and longer than it has to be. The relatively low position forces the rider to lower their head if they want to read or operate the navigation. This position results in the eyes constantly having to focus between long-distance and close up. This strains the eyes and causes tiredness. The safety aspect shouldn’t be underestimated either, because the rider is forced to regularly take their eyes off the road. Our base holder helps here: it positions the navigation device in the natural line of sight for ergonomically optimal visibility and operability, making your ride more relaxed. This position is located above the TFT combi instrument. This ensures the rider always has their eyes on the road and an eye on the navigation at the same time. This arrangement has been tried and tested and provides noticeably greater comfort while riding, navigating and operating, meaning it avoids premature tiredness and increases safety in road traffic. The carrier simply attaches to the windshield bracket. The base holder can be individually positioned and is made of black powder-coated stainless steel. Note: The original BMW navigation prep and Navigator are not included in the scope of delivery. Function Consists of base holder and attachment materials to accommodate the original BMW motorcycle navigation system Ergonomic positioning of the navigation device Visually ergonomic positioning in the line of sight Ergonomically optimal positioning for operation Ensures relaxed and safe riding Increases safety because your gaze stays on the road while navigating Avoids tiredness Avoids restriction of the steering angle and thus the turning radius Easy and secure assembly on the original windshield bracket Base holder can be individually positioned Technical information Material: Stainless steel components, high-quality and precision crafted, black powder coating Features Wunderlich premium product. Small batches. Made by hand Wunderlich. Functional and integrated design
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 21173-002 -
Luggage Accessories
BMW F-Series Luggage – Sidecases Set X-CASE
BMW F-Series Luggage – Sidecases Set X-CASE
THE WUNDERLICH X-CASES COMBINE ROBUSTNESS WITH LIGHTWEIGHT DESIGN Function and Product Features The aluminium of the X-CASEs combines robustness and light weight Thus, they are ideal for adventure or classic touring The contemporary and stylish X-CASE cases will accompany you through thick and thin on any terrain Proven storage volume of 36 litres per case – a total of 72 litres Stainless steel quick-release system with integrated, foldable carrying handle for one-handed opening, closing, attaching to the case carrier and carrying Side opening: Perfect for accessing the contents of the case A plastic partition and a removable net secure the contents of the case when opened and provide tidy organisation 100% dust and waterproof: Maximum protection for luggage thanks to water and dust tightness provided by a special all-round rubber seal Includes key Lock cylinder protected against dirt and moisture by a cover cap With high-quality embossed Wunderlich brand logo Note Please order the appropriate case carrier separately The X-RACK case carrier is not included in the delivery as it varies from motorcycle model to motorcycle model – it must therefore be ordered specifically for your model. Technical Data Material Shell: Aluminium, hardened, high-strength, powder-coated black, carefully and precisely processed Quick-release system: Stainless steel Lock cylinder including key Dimensions Width 49.5 cm Height 40.0 cm Depth 28.2 cm Material thickness 1.2 mm Volume 36 litres per case – a total of 72 litres Payload 10 kg Your Wunderlich Advantages Wunderlich. Riding 365. Made by Wunderlich Exclusive by Wunderlich Tested by Wunderlich IDEAL FOR ADVENTURE TOURING – THEY EFFORTLESSLY HANDLE THE DEMANDS OF CLASSIC TOURING The aluminium of the X-CASEs is hardened. Thus, it meets the requirements for both robustness and light weight. This makes them ideal for adventure touring – and they easily handle the demands of classic touring. The lightweight X-CASE cases will accompany you through thick and thin on any terrain! Attaching to the carrier is straightforward. The stainless steel locking mechanism features an integrated, foldable carrying handle that allows the cases to be opened, closed, mounted or dismounted in seconds. The integral design is contemporary with a high recognition value. The consistent use of only high-quality materials ensures the sustainable durability of the X-CASE luggage system. This is further enhanced by the high-quality processed aluminium sheet and the octagonal shape designed for stability, weight optimisation and aerodynamics. The frame is equipped with a proven, absolutely dust and waterproof sealing system that reliably protects the contents. The cases are equipped with a partition and a net – both secure the contents, provide tidy organisation and reduce vibrations and shocks. Once the lock is opened, the lid can be lifted and the X-CASE case can be conveniently loaded from the side. A custom-fit cap protects the lock from moisture and dirt. The lid features a high-quality embossed Wunderlich brand logo.
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 30166-302
