Lighting
Showing 49–72 of 113 results
-
Lighting Accessories
JEEP WRANGLER OE RUBICON OR SAHARA BUMPER DUAL REVERSE LIGHT KIT – ONX6+ 50 INCH
Lighting AccessoriesJEEP WRANGLER OE RUBICON OR SAHARA BUMPER DUAL REVERSE LIGHT KIT – ONX6+ 50 INCH
JEEP WRANGLER OE RUBICON OR SAHARA BUMPER DUAL REVERSE LIGHT KIT – ONX6+ 50 INCH
The JL S2 Reverse Kit provides piece of mind and clarity in a variety of situations. The S2 LED light provides crisp, clear illumination for the rear zone of your Jeep. Can be used as a high output reverse light to illuminate night time obstacles, or as a highly visible dust light for protection from other drivers in adverse conditions. This kit includes one pair of S2 LED lights, vehicle specific mounting brackets, hardware, and an Upfitter Wiring harness for models with factory Upfitter switch provisions. uService – Replaceable Lenses And Optics ClearView – All The Light, Right Where You Need It MoistureBlock – Waterproof, Rain Proof, Submersible CopperDrive – Only LED Driven At 100 Percent 5000K Daylight – Less Driver Fatigue, Natural Color This kit does not work with the “Sport” trim rear bumpers Specifications Housing Material Powder Coated Cast Aluminum Lens Color Clear Lens Material Hardcoated Polycarbonate Light Quantity 1 Lighting Modes Beam Lighting Quantity 2 Lighting Technology LED Lighting Type Forward Projecting Mounting Hardware Included Yes Mounting Hardware Material Stainless Steel Overvoltage Protection Built-In Product Type S2 Sport LED Light Pod Wattage (W) 12.420 Wiring Harness Included No Amperage Rating (A) 0.900 Average Rated Life (hr.) 49,930 Beam Pattern Wide Cornering Bezel Material Powder Coated Cast Aluminum Brightness (Lumens) 1581 Description Wide Cornering; Clear Housing Color Black Standards & Compliance Standards/Compliance (Durability) Exceeds MIL-STD810G (Mil-Spec Testing) Standards/Compliance (Impact Resistance) IK10 Compliant (Mechanical Impact Testing) Standards/Compliance (Water Resistance) IP69K (Waterproof up to 9ft & Pressure Washable) Dimensions Depth 4.27 cm Height 4.47 cm Length 7.44 cm Weight 0.23 kg
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 447651 -
Auxiliary Lights
JEEP WRANGLER OE STEEL BUMPER LIGHT KIT – LP4 PRO
JEEP WRANGLER OE STEEL BUMPER LIGHT KIT – LP4 PRO
This lighting and wiring setup has been tested on the Jeep JL / JT with the Rubicon Steel bumper to take the guess work out of installation! The wiring in this kit is specifically designed to run in conjunction with factory upfitter systems or sPOD / Switch Pros units. The LP4 is the smallest variant in the LP line up but maintains all of the power and features of its siblings. The LP4 features a total of 8,750 lumens and a 200 degree spread of useable LED light. This light pumps out 7,050 forward projecting lumens and 1,700 lumens of dedicated peripheral lighting courtesy of our patented Integrated Peripheral Technology (IPT). To keep your light performing at its highest potential, the LP4 integrates our proprietary Direct Ducted Cooling (DDC) technology. This feature allows air to travel through the front of the housing, over the rear heat sinks – drastically improving cooling capacity and performance. With an amber day-time running light, the LP4 will fulfill all your lighting needs. uService – Replaceable Lenses And Optics ClearView – All The Light, Right Where You Need It MoistureBlock – Waterproof, Rain Proof, Submersible CopperDrive – Only LED Driven At 100 Percent 5000K Daylight – Less Driver Fatigue, Natural Color Specifications Mounting Hardware Material Stainless Steel Overvoltage Protection Built-In Product Type LP4 Pro LED Light Pod Secondary Amperage Rating (A) 1.000 Secondary Brightness (Lumens) 1972 Secondary Light Quantity 4 LEDs Secondary Lighting Technology LED Secondary Lighting Type Integrated Peripheral Technology (IPT) Secondary Wattage (W) 15 Terminal Connector DT06-4S Deutsch Terminal Type Mating Connector Universal or Specific Universal Wattage (W) 75.900 Wiring Harness Included No Amperage Rating (A) 5.500 Average Rated Life (hr.) 49,930 Backlight Amperage Rating (A) 0.350 Backlight Wattage (W) 4.830 Beam Pattern Driving/Combo Bezel Material Powder Coat Cast Aluminum Brightness (Lumens) 8857 Description Driving/Combo; Clear Housing Color Black Housing Material Powder Coat Cast Aluminum Lens Color Clear Lens Material Hardcoated Polycarbonate Light Quantity 1 Lighting Modes Beam/Day-Time Running Backlighting Lighting Quantity 4 Lighting Technology LED Lighting Type Forward Projecting Mounting Hardware Included Yes Standards & Compliance Standards/Compliance (Durability) Exceeds MIL-STD810G (Mil-Spec Testing) Standards/Compliance (Impact Resistance) IK10 Compliant (Mechanical Impact Testing) Standards/Compliance (Water Resistance) IP69K (Waterproof up to 9ft & Pressure Washable) Dimensions Depth 8.13 cm Height 12.95 cm Length 12.95 cm Weight 1.27 kg
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 447672 -
Auxiliary Lights
JEEP WRANGLER OE STEEL BUMPER LIGHT KIT – LP6 PRO
JEEP WRANGLER OE STEEL BUMPER LIGHT KIT – LP6 PRO
This lighting and wiring setup has been tested on the Jeep JL / JT with the Rubicon Steel bumper to take the guess work out of installation! The wiring in this kit is specifically designed to run in conjunction with factory upfitter systems or sPOD / Switch Pros units. The LP6 Pro is a 6-inch powerhouse featuring a total of 10,300 lumens and a 200 degree spread of useable LED light. The LP6 features 8,600 forward projecting lumens and 1,700 lumens of dedicated peripheral lighting courtesy of our patented Integrated Peripheral Technology (IPT). To keep your light performing at its highest potential, the LP6 integrates our proprietary Direct Ducted Cooling (DDC) technology. This feature allows air to travel through the front of the housing, over the rear heat sinks – drastically improving cooling capacity and performance. With an amber day-time running light, low power, and high power mode, the LP6 will fulfill all your lighting needs. uService – Replaceable Lenses And Optics ClearView – All The Light, Right Where You Need It MoistureBlock – Waterproof, Rain Proof, Submersible CopperDrive – Only LED Driven At 100 Percent 5000K Daylight – Less Driver Fatigue, Natural Color Standards & Compliance Standards/Compliance (Water Resistance) IP69K (Waterproof up to 9ft & Pressure Washable) Standards/Compliance (Durability) Exceeds MIL-STD810G (Mil-Spec Testing) Standards/Compliance (Impact Resistance) IK10 Compliant (Mechanical Impact Testing) Dimensions Depth 8.13 cm Height 16.51 cm Length 16.51 cm Weight 1.90 kg Specifications Amperage Rating (A) 7.500 Average Rated Life (hr.) 49,930 Backlight Amperage Rating (A) 0.300 Backlight Wattage (W) 4.140 Beam Pattern Driving/Combo Bezel Material Powder Coat Cast Aluminum Brightness (Lumens) 11225 Description Driving/Combo; Clear Housing Color Black Housing Material Powder Coat Cast Aluminum Lens Color Clear Lens Material Hardcoated Polycarbonate Light Quantity 1 Lighting Modes High Beam/Low Beam/Day-Time Running Backlighting Lighting Quantity 6 Lighting Technology LED Lighting Type Forward Projecting Mounting Hardware Included Yes Mounting Hardware Material Stainless Steel Overvoltage Protection Built-In Product Type LP6 Pro LED Light Pod Secondary Amperage Rating (A) 1.000 Secondary Brightness (Lumens) 1972 Secondary Light Quantity 4 LEDs Secondary Lighting Technology LED Secondary Lighting Type Integrated Peripheral Technology (IPT) Secondary Wattage (W) 15 Terminal Connector DT06-4S Deutsch Terminal Type Mating Connector Universal or Specific Universal Wattage (W) 103.500 Wiring Harness Included No
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 447671 -
Auxiliary Lights
JEEP WRANGLER OE STEEL BUMPER LIGHT KIT – XL80
JEEP WRANGLER OE STEEL BUMPER LIGHT KIT – XL80
This lighting and wiring setup has been tested on the Jeep JL / JT with the Rubicon Steel bumper to take the guess work out of installation! The wiring in this kit is specifically designed to run in conjunction with factory upfitter systems or sPOD / Switch Pros units. This lighting and wiring setup has been tested on the Jeep JL / JT with the Rubicon Steel bumper to take the guess work out of installation! Choose to take your off-road lighting to the next level with BD’s 9,500 lumen XL80. Similar to BD’s XL Pro model, the XL80 offers a 20 percent dimming feature, a powder coated housing and an anodized bezel. However, this is where the similarities end. The XL80 features a very powerful LED for greater visibility and increased brightness. uService – Replaceable Lenses And Optics ClearView – All The Light, Right Where You Need It MoistureBlock – Waterproof, Rain Proof, Submersible CopperDrive – Only LED Driven At 100 Percent 5000K Daylight – Less Driver Fatigue, Natural Color Standards & Compliance Standards/Compliance (Water Resistance) IP69K (Waterproof up to 9ft & Pressure Washable) Standards/Compliance (Impact Resistance) IK10 Compliant (Mechanical Impact Testing) Standards/Compliance (Durability) Exceeds MIL-STD810G (Mil-Spec Testing) Specifications Wiring Harness Included No Wattage (W) 75.900 Universal or Specific Universal Average Rated Life (hr.) 49,930 Amperage Rating (A) 5.500 Beam Pattern Spot Bezel Material Powder Coated Cast Aluminum Description Driving/Combo; Clear Product Type XL80 LED Light Pod Overvoltage Protection Built-In Mounting Hardware Material Stainless Steel Mounting Hardware Included Yes Lighting Type Forward Projecting Lighting Technology Cree LED Lighting Quantity 4 Lighting Modes High Beam/Dimming Feature (20%) Light Quantity 1 Lens Material Hardcoated Polycarbonate Lens Color Clear Housing Material Hard Anodized and Powder Coated Cast Aluminum Housing Color Black Brightness (Lumens) 9022 Dimensions Weight 1.11 kg Length 11.25 cm Height 11.25 cm Depth 9.27 cm
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 447669 -
Auxiliary Lights
JEEP WRANGLER ROOF MOUNT LIGHT KIT – ONX6+ 50 INCH
JEEP WRANGLER ROOF MOUNT LIGHT KIT – ONX6+ 50 INCH
This is the ultimate roof-mounted light bar kit for the Jeep JL and Gladiator JT platforms. The 50-inch OnX6 plus combines far-reaching, high-speed spot reflectors with the Baja Designs Driving Combo lens for a smooth yet intense pattern that lights up the whole trail. This kit includes a 50-inch OnX6 plus LED Light Bar, vehicle-specific mounting brackets, hardware, and wiring to make installation a breeze. No cutting, trimming, or drilling is required and all wiring is pre-sized for your vehicle. This kit includes an Upfitter Wiring harness for models with factory Upfitter switch provisions. For Mojave models, longer bolts will be needed for mounting (See note below). Warning: Installation of any roof-mounted lights will cause a degree of added wind noise depending on vehicle type and installed accessories. NOTE: This roof bar does NOT fit Mojave and 392 models. uService – Replaceable Lenses And Optics ClearView – All The Light, Right Where You Need It MoistureBlock – Waterproof, Rain Proof, Submersible CopperDrive – Only LED Driven At 100 Percent 5000K Daylight – Less Driver Fatigue, Natural Color NOTE: Mojave requires 80mm bolts for the roof bar. The roof bar does NOT fit 392 models. Specifications Housing Material Aircraft Grade Aluminum with Mil-Spec Hard Anodize Lens Color Clear Lighting Modes Hardcoated Polycarbonate Light Quantity 1 Lens Material High Beam/Low Beam Lighting Quantity 30 Lighting Type LED Lighting Technology Forward Projecting Mounting Hardware Description Mounting Brackets Mounting Hardware Included Yes Mounting Hardware Material Stainless Steel Overvoltage Protection Built-In Product Type OnX6+ 50 Inch LED Light Bar Universal or Specific Universal Wattage (W) 355 (High) Wiring Harness Included No Amperage Rating (A) 28.2 (High) Average Rated Life (hr.) 49,930 Beam Pattern Driving/Combo Bezel Material Billet Machined Aluminum Brightness (Lumens) 39,430 (High) Description Straight; Driving/Combo; Clear Housing Color Black Housing Material Aircraft Grade Aluminum with Mil-Spec Hard Anodize Lens Color Clear Lens Material Hardcoated Polycarbonate Light Quantity 1 Lighting Modes High Beam/Low Beam Lighting Quantity 30 Lighting Technology LED Lighting Type Forward Projecting Mounting Hardware Description Mounting Brackets Mounting Hardware Included Yes Mounting Hardware Material Stainless Steel Overvoltage Protection Built-In Product Type OnX6+ 50 Inch LED Light Bar Universal or Specific Universal Wattage (W) 355 (High) Wiring Harness Included No Standards & Compliance Standards/Compliance (Durability) Exceeds MIL-STD810G (Mil-Spec Testing) Standards/Compliance (Water Resistance) IK10 Compliant (Mechanical Impact Testing) Standards/Compliance (Impact Resistance) IP69K (Waterproof up to 9ft & Pressure Washable) Standards/Compliance (Durability) Exceeds MIL-STD810G (Mil-Spec Testing) Standards/Compliance (Impact Resistance) IK10 Compliant (Mechanical Impact Testing) Standards/Compliance (Water Resistance) IP69K (Waterproof up to 9ft & Pressure Washable) Dimensions Depth 10.89 cm Height 6.83 cm Length 127.00 cm Weight 8.46 kg NOTE: This roof bar does NOT fit Mojave and 392 models.
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 447666 -
Auxiliary Lights
JEEP WRANGLER ROOF MOUNT LIGHT KIT – S8 50 INCH
JEEP WRANGLER ROOF MOUNT LIGHT KIT – S8 50 INCH
The 50-inch S8 Roof Bar Kit for JL and Gladiator JT is a sleek, stylish, and bright LED light kit for any off-road or outdoors enthusiast looking to get the most out of their trip. Add hours of driving and adventure to your night with a reliable and high-performing light bar solution that will look great on any Jeep JL or JT. This kit includes a 50-inch S8 LED Light Bar, vehicle-specific mounting brackets, hardware, and wiring to make installation a breeze. No cutting, trimming, or drilling is required and all wiring is pre-sized for your vehicle. This kit includes an Upfitter Wiring harness for models with factory Upfitter switch provisions. Warning: Installation of any roof-mounted lights will cause a degree of added wind noise depending on vehicle type and installed accessories. NOTE: This roof bar does NOT fit Mojave and 392 models. uService – Replaceable Lenses And Optics ClearView – All The Light, Right Where You Need It MoistureBlock – Waterproof, Rain Proof, Submersible CopperDrive – Only LED Driven At 100 Percent 5000K Daylight – Less Driver Fatigue, Natural Color Warning: Installation of any roof mounted lights will cause a degree of added wind noise depending on vehicle type and installed accessories. Dimensions Depth 7.62 cm Height 4.06 cm Length 127.00 cm Weight 4.88 kg Specifications Amperage Rating (A) 20.0 Average Rated Life (hr.) 49,930 Beam Pattern Driving/Combo Bezel Material Billet Machined Aluminum Brightness (Lumens) 31,750 Description Driving/Combo; Clear Housing Color Black Housing Material Aircraft Grade Aluminum with Mil-Spec Hard Anodize Lens Color Clear Lighting Modes Hardcoated Polycarbonate Light Quantity 1 Lens Material Beam/Amber Backlit Feature Lighting Quantity 40 Lighting Type Cree LED Lighting Technology Forward Projecting Mounting Hardware Description Mounting Brackets Mounting Hardware Included Yes Mounting Hardware Material Stainless Steel Overvoltage Protection Built-In Product Type S8 50 Inch LED Light Bar Universal or Specific Universal Wattage (W) 300 Wiring Harness Included No Housing Material Aircraft Grade Aluminum with Mil-Spec Hard Anodize Lens Color Clear Lens Material Hardcoated Polycarbonate Light Quantity 1 Lighting Modes Beam/Amber Backlit Feature Lighting Quantity 40 Lighting Technology Cree LED Lighting Type Forward Projecting Mounting Hardware Description Mounting Brackets Mounting Hardware Included Yes Mounting Hardware Material Stainless Steel Overvoltage Protection Built-In Product Type S8 50 Inch LED Light Bar Universal or Specific Universal Wattage (W) 300 Wiring Harness Included No Standards & Compliance Patent No. D780,964 Standards/Compliance (Durability) Exceeds MIL-STD810G (Mil-Spec Testing) Standards/Compliance (Water Resistance) IK10 Compliant (Mechanical Impact Testing) Standards/Compliance (Impact Resistance) IP69K (Waterproof up to 9ft & Pressure Washable) Patent No. D780,964 Standards/Compliance (Durability) Exceeds MIL-STD810G (Mil-Spec Testing) Standards/Compliance (Impact Resistance) IK10 Compliant (Mechanical Impact Testing) Standards/Compliance (Water Resistance) IP69K (Waterproof up to 9ft & Pressure Washable) NOTE: This roof bar does NOT fit Mojave and 392 models.
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 447665 -
Headlights
JEEP WRANGLER W/HALOGEN HEADLIGHTS -DOT LP6 LED HEADLIGHT
JEEP WRANGLER W/HALOGEN HEADLIGHTS -DOT LP6 LED HEADLIGHT
For the Jeep JL/JT that comes stock with halogen headlights, the DOT LP6 LED headlight replacement makes driving safer and your Jeep more capable. The Baja Designs DOT LP6 LED headlight replacement is our first-ever road-legal headlight kit designed to fit seamless in the Jeep Wrangler JL and Gladiator JT with factory halogen headlights. Inspired by the same LP6 trusted in the toughest off-road races, it’s been re-engineered utilizing projector optics to meet FMVSS 108 standards delivering maximum road-legal performance with Baja Designs racing DNA maintain that same iconic look. Featuring a standard high and low beam, the DOT LP6 has integrated white or amber daytime running lights. And with JL/JT-specific brackets and wiring harness integration is effortless, with a factory fit that feels like it was always meant to be there. Backed by Baja Designs’ 30-Day Satisfaction Guarantee and Lifetime Limited Warranty, the DOT LP6 is the ultimate combination of rugged durability, style, and road-legal usability. NOTE: uService® is NOT a feature of DOT products. If tampered, it will void the warranty. Our Limited Lifetime Warranty is valid only if sent back for repairs. Features: Low and high beam functionality Daytime running lights for daytime safety available in amber or white Jeep JL/JT specific mounting brackets included Low beam 3,480 raw lumens | 42,568.7 candela High beam 5,280 raw lumens | 62,611.5 candela High beam 40w / 2.8A Low beam 26w / 1.8A DRL: 5w / 0.4A Headlight kit designed for Jeep JL/JT with factory halogen headlights only Includes: (2x) DOT LP6 White or Amber DRL Lights (4x) JL/JT Headlight Brackets (2x) Wiring Harness for Halogen Lights (1x) Wiring Harness, Backlight add-on All Necessary Mounting Hardware The Baja Designs Advantage: ClearView – All the Light, Right Where You Need It MoistureBlock – Waterproof, Rain Proof, Submersible CopperDrive – Safely Driving LEDs at 100% 5000K Daylight – Less Driver Fatigue, Natural Color Standards & Compliance Standards/Compliance (Impact Resistance) IP69K (Waterproof up to 9ft & Pressure Washable) Standards/Compliance (Water Resistance) IK10 Compliant (Mechanical Impact Testing) Standards/Compliance (Durability) Exceeds MIL-STD810G (Mil-Spec Testing); FMVSS 108 for automotive and motorcycle requirement Dimensions Depth 8.13 cm Height 16.51 cm Length 16.51 cm Specifications Description DRL Color: Clear; DRL: 5W; Candela: 42,568 (Low) 62,611 (High) Voltage 10.5 to 32V Wattage (W) Single Lamp at 13.8V; 26W (L) 40W (H) Brightness (Lumens) 3,480 (Low) 5,280 (High) Beam Pattern Low Beam: 10Lux out to 50meters (Standard Spec for DOT Headlights) Wiring Harness Included Yes; Brackets Included Amperage Rating (A) 1.8A (L) 2.8A (H) NOTE: This Headlight Replacement Kit is Designed for Vehicles with Factory Halogen Headlights Only.
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 44-8312 -
Headlights
JEEP WRANGLER W/LED HEADLIGHTS -DOT LP6 LED HEADLIGHT
JEEP WRANGLER W/LED HEADLIGHTS -DOT LP6 LED HEADLIGHT
Your Jeep deserves headlights as capable as the vehicle itself. The Baja Designs DOT LP6 is our first-ever road-legal headlight kit designed to fit seamless in the Jeep Wrangler JL and Gladiator JT with factory LED headlights. Inspired by the same LP6 trusted in the toughest off-road races, it’s been re-engineered utilizing projector optics to meet FMVSS 108 standards delivering maximum road-legal performance with Baja Designs racing DNA maintain that same iconic look. Featuring a standard high and low beam the DOT LP6 has integrated white, amber daytime running lights. And with JL/JT-specific brackets and wiring harness integration is effortless, with a factory fit that feels like it was always meant to be there. Backed by Baja Designs’ 30-Day Satisfaction Guarantee and Lifetime Limited Warranty, the DOT LP6 is the ultimate combination of rugged durability, style, and road-legal usability. NOTE:uService® is NOT a feature of DOT products. If tampered, it will void the warranty. Our Limited Lifetime Warranty is valid only if sent back for repairs. Features: Low and high beam functionality Daytime running lights for daytime safety available in amber or white Jeep JL/JT specific mounting brackets included Low beam 3,480 raw lumens | 42,568.7 candela High beam 5,280 raw lumens | 62,611.5 candela High beam 40w / 2.8A Low beam 26w / 1.8A DRL: 5w / 0.4A Headlight kit designed for Jeep JL/JT with factory LED headlights only Includes: (2x) DOT LP6 White or Amber DRL Lights (4x) JL/JT Headlight Brackets (2x) Wiring harness for LED lights All Necessary Mounting Hardware The Baja Designs Advantage: ClearView – All the Light, Right Where You Need It MoistureBlock – Waterproof, Rain Proof, Submersible CopperDrive – Safely Driving LEDs at 100% 5000K Daylight – Less Driver Fatigue, Natural Color Dimensions Depth 8.13 cm Height 16.51 cm Length 16.51 cm Specifications Description DRL Color: Amber; DRL: 5W; Candela: 42,568 (Low) 62,611 (High) Voltage 10.5 to 32V Wattage (W) Single Lamp at 13.8V; 26W (L) 40W (H) Brightness (Lumens) 3,480 (Low) 5,280 (High) Beam Pattern Low Beam: 10Lux out to 50meters (Standard Spec for DOT Headlights) Wiring Harness Included Yes; Brackets Included Amperage Rating (A) 1.8A (L) 2.8A (H) Standards & Compliance Standards/Compliance (Impact Resistance) IP69K (Waterproof up to 9ft & Pressure Washable) Standards/Compliance (Water Resistance) IK10 Compliant (Mechanical Impact Testing) Standards/Compliance (Durability) Exceeds MIL-STD810G (Mil-Spec Testing); FMVSS 108 for automotive and motorcycle requirement NOTE: This Headlight Replacement Kit is Designed for Vehicles with Factory LED Headlights Only.
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 44-8303 -
Headlights
KAWASAKI ELIMINATOR 500 Protection – Headlight Grill
KAWASAKI ELIMINATOR 500 Protection – Headlight Grill
Headlight Grill by Hepco Becker A flying rock or a short off-road-trip can destroy an expensive headlight. The headlight grill not only protects that but also adds the ruggedness feel to your bike! Our HEPCO BECKER headlight grill keeps the light protected and also adds an great off-road look. Specially designed for the bike they come with the necessary parts to fit the headlight grill Easy assembly and easy cleanability Black powder coated finish for the ADV bikes Solid steel construction No reflections or self-produced glare 100% designed and made in Germany Elegantly made to ensure the look and feel of the lines of the bike
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 7002552 00 01 -
Auxiliary Lights
KTM LED HEADLIGHT KIT – XL40
KTM LED HEADLIGHT KIT – XL40
Upgrade your off-road lighting with the Baja Designs XL40 LED Headlight Kit — purpose-built for KTM XC-W, EXC-F, XW-F, and XCF-W motorcycles. Derived from the powerhouse XL80, the XL40 delivers 5,224 lumens of trail-proven illumination to a wider range of bikes. Engineered specifically for dirt bikes with lower-output OEM stators, the XL40 draws only 43.5W, making it an ideal high-performance lighting upgrade for riders who previously lacked a compatible premium option. Paired with the signature XL Trail Lens, the XL40 produces both vertical and horizontal beam patterns with exceptional near-field and peripheral visibility. The Trail Lens redistributes center beam intensity to eliminate harsh hot spots, improving clarity through vertical transitions, elevation changes, and tight corners. The result is a smooth, evenly distributed field of light that boosts rider confidence in the most demanding terrain. This kit replaces the OEM headlight unit and includes the Motominded mount for precise fitment and easy installation. Depending on the configuration, the kit may include a Hi/Low harness or a dimmer switch, giving riders flexible brightness control: Hi/Low Harness: reduces output to approximately 25% brightness in low-beam mode (1,435 lumens). Dimmer Switch: allows fully variable brightness control from 95% down to 20% output, letting riders dial in the exact light level needed for the terrain. Backed by Baja Designs’ 30-Day Satisfaction Guarantee and Limited Lifetime Warranty, this kit delivers professional-grade durability and performance. Kit Includes (1x) XL40 – Trail Lens Clear w/ 2024+ OEM Connector (1x) Motominded XL Bracket (1x) Hi/Low Harness or Dimmer Switch (depending on kit configuration) All Necessary Mounting Hardware XL40 Specifications (Per Light) Lumens: 5,224 (High) / 1,435 (Low) Power: 43.5W / 3.4A @ 12.8V Modes: High Beam with brightness control (Hi/Low or dimmer depending on configuration) XL40 ELS Score Trail Lens – High Beam: 92° / 5.9 / 226’ / 5224 lumens Trail Lens – Low Beam: 74° / 5.9 / 119’ / 1435 lumens The Baja Designs Advantage Satisfaction Guarantee – 30-Day Money Back Guarantee Limited Lifetime Warranty – Complete Purchase Protection uService – Replaceable lenses and optics ClearView – All the light, right where you need it MoistureBlock – Waterproof, rainproof, and submersible CopperDrive – Safely drives LEDs at 100% efficiency 5000K Daylight – Reduces driver fatigue with natural color output Specifications Product Type XL40 Overvoltage Protection Built-In Mounting Hardware Included Yes Lighting Type Forward Projecting Lighting Technology LED Lighting Quantity 4 Lighting Modes Beam Light Quantity 1 Lens Material Hardcoated Polycarbonate Lens Color Clear Mounting Hardware Material Stainless Steel Universal or Specific Universal Wiring Harness Included No Wattage (W) 43.5 Housing Material Powder Coated Cast Aluminum Housing Color Black Description Trail; Clear Brightness (Lumens) 5,224 (Hi) / 1,435 (Low) Bezel Material Powder Coated Cast Aluminum Beam Pattern Trail Average Rated Life (hr.) 49930 Amperage Rating (A) 3.4 High: 92°/5.9/226’/5224; Low: 74°/5.9/119’/1435
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 82-1003 -
Lighting Accessories
LED Auxillary lights Microflooter 3
LED Auxillary lights Microflooter 3
With a full 2 x 4000Lu, so a total of 8000 lumen, they provide four times the luminous flux of conventional auxiliary headlights. As well as their compact design, the MICROFLOOTER LED auxiliary headlights are extremely bright and durable despite a very low energy consumption. Thanks to the two individual LEDs per headlight and the E proved Wunderlich lenses marked with our brand logo, they have an unmistakable light design that is recognizable from afar. The two LEDs also provide redundancy: If, against the odds, one of the two fails, the other continues to work. We also equip the auxiliary and fog lights with fold-down, effective protective grids as standard – safe is safe! The headlights are conveniently operated via an illuminated switch on the handlebar. The colour of the light is the same as the main headlight. The lights are installed using Plug & Play. A considerable increase in active and passive safety Thanks to the significantly enlarged field of vision at night, the shapely and high-quality headlights optimise active safety. The light spectrum of the LEDs produces a realistic colour reproduction at night and thereby guarantees fatigue-free riding. They also optically enlarge the front silhouette and appearance of the motorcycle. With this and the colour of the emitted light, they improve visibility for all other road users considerably, thereby providing considerably more passive safety. Not only in rain and fog, at dusk or in shady stretches of forest, but under all conceivable light conditions. This significantly reduces the danger of accidents caused by reduced visibility. The housings are made from black anodized aluminum, the brackets are from black powder-coated stainless steel. The facts Function MICROFLOOTER 3.0: Excellent, even illumination of the road when riding in fog, rain and at night No scattered light and no glare from reflected light Significant increase in road safety under all conceivable light conditions thanks to optical enlargement of the front silhouette Extremely bright and durable despite low energy consumption The E proved Wunderlich lenses are marked with the brand logo The two individual LEDs per headlight create an unmistakable light design that is easily recognizable Redundancy: If, against the odds, one of the two LEDs fails, the other continues to work Provides the optimum light spectrum that is matched to the main headlight Very good lighting in addition to the main headlight E proved as a fog headlight (does not need to be registered) Extremely robust – water-tight (degree of protection IPX7) Fitted with tiltable safety grilles as standard Illuminated switch Model-specific, specially designed brackets made from black powder-coated stainless steel for perfect vehicle integration Complete set with headlight and bracket (right and left) Plug & Play wiring harness Technical info Extremely efficient light system with 12 V/40 W/4000 Lm per headlight Service life approx. 100,000 hours = approx. 4000 days IPX7 tested Integrated ballast MICROFLOOTER housing made from aluminium, black anodised High-quality bracket made from stainless steel, powder-coated, black The Wunderlich benefits Wunderlich. Functional, integrated design. Small series. Hand crafted.
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 28342-102 -
Lighting Accessories
Light Covers – LP
Light Covers – LP
This rock guard/light cover fits the LP series . It is designed for daytime use, to protect from harsh terrain that may throw dirt, dust and rocks at your LP LED lights. If you are looking for extra protection from your riding environments and a cool cover, then the LP rock guard is your answer! Please note that in some states it is required that you carry or have rock guards on your lights when traveling on highway.
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 27-8001 -
Light Bars
Light Covers – ONX6 + S8
Light Covers – ONX6 + S8
Led Lights Bar for S8 254mm (10″) Rock Guard & Covers: The S8 Rock Guards are designed for day or nighttime use. We have three color options to suit all your needs – whether you need a black light cover to comply with local laws, want to use the amber guard to quickly switch between white and amber light, or the clear rock guard for additional protection from sand blasting and rogue rocks. OnX6, 254mm (10″) Rock Guard – Black : The OnX6 Rock Guards are designed for day or nighttime use. We have three color options to suit all your needs – whether you need a black light cover to comply with local laws, want to use the amber guard to quickly switch between white and amber light, or the clear rock guard for additional protection from sand blasting and rogue rocks.
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 45-8412 -
Lighting Accessories
Light Covers – S1
Light Covers – S1
Amber & Black colour Rock Guards for S1 Series Baja Designs Amber Cover:- This amber rock guard/light cover fits the S1. It is designed for daytime and nighttime use. Not only does it protect your S1 LED lights from harsh terrain that may throw dirt, dust and rocks, it also converts your S1 to amber colour. If you are looking for extra protection from your riding environments and a cool cover, then the S1 rock guard is your answer! Rock Guard:- This rock guard/light cover fits the S1. It is designed for daytime use, to protect from harsh terrain that may throw dirt, dust and rocks at your S2 LED lights.If you are looking for extra protection from your riding environments and a cool cover, then the S1 rock guard is your answer!
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 38-8002 -
Lighting Accessories
Light Covers – SQUADRON
Light Covers – SQUADRON
Amber, Clear & Black Guards for Squadron Series Baja Designs Amber Cover:- This amber rock guard/light cover fits the Squadron Pro & Squadron Sport. It is designed for daytime and nighttime use. Not only does it protect your Squadron LED lights from harsh terrain that may throw dirt, dust and rocks, it also converts your Squadron to amber colour. If you are looking for extra protection from your riding environments and a cool cover, then the Squadron rock guard is your answer! Rock Guard:- This rock guard/light cover fits the Squadron Pro & Squadron Sport. It is designed for daytime use, to protect from harsh terrain that may throw dirt, dust and rocks at your Squadron LED lights.If you are looking for extra protection from your riding environments and a cool cover, then the Squadron rock guard is your answer! Clear Guard:- Does not Change the diffraction only protects the lens
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 66-8002 -
Lighting Accessories
Light Covers – XL Series
Light Covers – XL Series
Amber, Clear & Black Guards for XL Series Baja Designs Not only does it protect your LED lights from harsh terrain that may throw dirt, dust and rocks, it also converts your Squadron to amber colour. If you are looking for extra protection from your riding environments and a cool cover, then the Squadron rock guard is your answer! Amber Cover:- This amber rock guard/light cover is designed for fog / rains as it offers better visibility/analysis to human eyes Rock Guard:- Covers the guards completely and lights cannot be seen Clear Guard:- Does not Change the diffraction only protects the lens
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 66-8004 -
Lights
LIGHT COVERS -SQUADRON 2.0
The Baja Designs Squadron 2.0 Series rock guard have been engineered specifically for Squadron 2.0 Sport and Squadron 2.0 Pro light pods. Rock guards provide essential protection for your lights, shielding them from rocks, debris, and other off-road hazards. Designed for quick installation and removal, these rock guards fit securely and simplify maintenance.
Color Options:
Black: Features the Baja Designs logo and fully covers the lights when off. Note: Black rock guards are not to be used while lights are on.
Baja Amber: Easily switch to baja amber lighting for enhanced visibility in dusty or adverse weather conditions.
Clear: Protects the lights while allowing full brightness to shine throughSKU: 66-8014 -
Lighting Accessories
Light Guards – S2
Light Guards – S2
Amber & Black colour Rock Guards for S2 Series Baja Designs Amber Cover:- This amber rock guard/light cover fits the S2. It is designed for daytime and nighttime use. Not only does it protect your S2 LED lights from harsh terrain that may throw dirt, dust and rocks, it also converts your S2 to amber colour. If you are looking for extra protection from your riding environments and a cool cover, then the S2 rock guard is your answer! Rock Guard:- This rock guard/light cover fits the S2. It is designed for daytime use, to protect from harsh terrain that may throw dirt, dust and rocks at your S2 LED lights.If you are looking for extra protection from your riding environments and a cool cover, then the S2 rock guard is your answer! Each Kit Includes: Price per pc Part Number:- Guards Amber :- 66-0101 Guards Black :- 660100
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 66-0101 -
Lighting Accessories
LP9/LP6 SERIES UPFITTER LOCK-OUT WIRING HARNESS – UNIVERSAL
LP9/LP6 SERIES UPFITTER LOCK-OUT WIRING HARNESS – UNIVERSAL
Crafted for seamless compatibility with power modules like sPOD, Switch-Pros, and factory upfitter systems, this harness serves a crucial role in preventing simultaneous power flow to both high and low circuits when wiring LP series lights. If you’re seeking a solution that eliminates the guesswork involved in wiring your LP series lights, this harness is the ideal choice for you. Application LP9/LP6 Description Upfitter Lock-Out Harness Mounting Hardware Included No Product Type LP9/LP6 Series Upfitter Lock-Out Wiring Harness Switch Included No Universal or Specific Universal Wiring Harness Description Upfitter Lock-Out Harness Wiring Harness Included Yes
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 64-0167 -
Lighting Accessories
Mounting Bracket for XL Linkable
Mounting Bracket for XL Linkable
The XL Linkable standard brackets are designed for customers looking to mount their linkable system on a flat surface. It can be used in conjunction with any of the Linkable sizes. NET QUANTITY : Mounting clamps 2N Brackets and Hardware meaning bolts, washers etc Preload Clamps 2N Clamps ( Needed when buying more than 5 lights set )
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 74-8000 -
Lighting Accessories
ONX6 ARC LED LIGHT BAR – UNIVERSAL
ONX6 ARC LED LIGHT BAR – UNIVERSAL
The OnX6+ Arc Series is the perfect combination of performance and aesthetics. The latest generation of the OnX6+ series is the most elite LED light bar utilizing high-speed spot reflectors for increased performance and versatility. We use next-generation LEDs that provide 37% greater distance over that last up to 50,000 hours and have a 5000K light temperature; this mimics natural daylight for better trail recognition and less eye fatigue. Beautifully arched to fit the contour of your bumper or windshield, the Arc Series redefines the capabilities of the standard/traditional LED light bar. Product Variants: OnX6+ 30 Inch Arc LED Light Bar (Spot Beam) Dimensions: 30″ (L) x 4.29″ (D) x 2.69″ (H) Weight: 11.45 lbs Brightness: 32,070 Lumens (High), 25,610 Lumens (Low) Power Consumption: 278W (High), 222W (Low) Amperage: 21.7A (High), 17.1A (Low) Lighting Quantity: 18 LEDs Lens Material: Hardcoated Polycarbonate Housing: Black Aircraft-Grade Aluminum Mounting Hardware: Stainless Steel Brackets (Included) Standards Compliance: IP69K Waterproof, MIL-STD810G, IK10 Impact Resistant SKU: 524001 OnX6+ 40 Inch Arc LED Light Bar (Spot Beam) Dimensions: 40″ (L) x 4.29″ (D) x 2.69″ (H) Weight: 15.05 lbs Brightness: 39,220 Lumens (High), 32,760 Lumens (Low) Power Consumption: 340W (High), 284W (Low) Amperage: 26.8A (High), 22.4A (Low) Lighting Quantity: 24 LEDs Lens Material: Hardcoated Polycarbonate Housing: Black Aircraft-Grade Aluminum Mounting Hardware: Stainless Steel Brackets (Included) Standards Compliance: IP69K Waterproof, MIL-STD810G, IK10 Impact Resistant SKU: 525001 OnX6+ 50 Inch Arc LED Light Bar (Spot Beam) Dimensions: 50″ (L) x 4.29″ (D) x 2.69″ (H) Weight: 18.65 lbs Brightness: 39,910 Lumens (High) Power Consumption: 346W (High) Amperage: 28.2A (High) Lighting Quantity: 30 LEDs Lens Material: Hardcoated Polycarbonate Housing: Black Aircraft-Grade Aluminum Mounting Hardware: Stainless Steel Brackets (Included) Standards Compliance: IP69K Waterproof, MIL-STD810G, IK10 Impact Resistant SKU: 523003 OnX6+ 30 Inch Arc LED Light Bar (Driving/Combo Beam) Same specifications as Spot Beam variant but with Driving/Combo Beam Pattern SKU: 524003 OnX6+ 40 Inch Arc LED Light Bar (Driving/Combo Beam) Same specifications as Spot Beam variant but with Driving/Combo Beam Pattern SKU: 525003 OnX6+ 50 Inch Arc LED Light Bar (Driving/Combo Beam) Same specifications as Spot Beam variant but with Driving/Combo Beam Pattern SKU: 523004 OnX6+ 30 Inch Arc LED Light Bar (Wide Cornering Beam) Same specifications as Spot Beam variant but with Wide Cornering Beam Pattern SKU: 523004 Key Features: High-intensity LED lighting for superior visibility Durable aircraft-grade aluminum housing with Mil-Spec Hard Anodize Multiple beam patterns to suit different driving conditions Overvoltage protection and IP69K waterproof rating Universal mounting compatibility with stainless steel brackets Each OnX6+ Arc LED Light Bar model is designed to withstand the toughest conditions while providing maximum brightness and efficiency for off-road adventures. Choose the size and beam pattern that best fits your needs! NOTE: This bar does not come with a wiring harness. You will need PN:640119 (Hi-Power w/Mode Switch 2-light max wiring harness)
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 52-3001 -
Lighting Accessories
ONX6/S8/XL 3-PIN HI-BEAM 2-LIGHT MAX (150 WATTS) WIRING HARNESS
ONX6/S8/XL 3-PIN HI-BEAM 2-LIGHT MAX (150 WATTS) WIRING HARNESS
This universal 12v wiring harness is capable of powering up 300w max (150w per plug) and has been specifically designed for our 3-pin lights, this includes OnX6 series, S8 series, and XL series lights. It includes a tap-in for your Hi-Beams to provide power to the lights. This harness comes ready to power up to two (2) Baja Designs LED lights of the series listed above. NOTE: This harness can handle up to 300w Max (150w per plug). Harness is for the following lights: OnX6 series S8 Series XL Series Specifications Application OnX6/S8/XL Description 2-Lights Max; Hi-Beam Tap; 300Watts Mounting Hardware Included No Product Type OnX6/S8/XL 3-Pin Hi-Beam 2-Light Max Wiring Harness Switch Included No Switch Type Hi-Beam Tap Terminal Connector 2 Three-Pin Connections Terminal Type Splice Connectors Universal or Specific Universal Wiring Harness Description Wiring Harness Wiring Harness Included Yes
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 64-0163 -
Lighting Accessories
Parts Bag S1 Series – Universal
Parts Bag S1 Series – Universal
Features all necessary hardware and brackets to mount a single S1 light. If you need to mount a pair of S1’s, purchase qty 2 of this part number. Bracket Material Stainless Steel Description Hardware Kit for S1 Mounting Hardware Included Yes Mounting Hardware Material Stainless Steel Product Type S1 Single Parts Bag
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 66-0309 -
Lighting Accessories
Push Button Switch
Push Button Switch
This harness allows you to bypass the light’s activation of the high beam circuit by merely depressing a push button switch. This version has two bullet connectors for connection. The Baja Designs XL Pro/XL80 Mode Wire Kit contains: · Push Switch If you’re trying to use this on a factory dual-sport bike that is legal for the street, this product is not for you. This harness was designed to simply add the dimming feature to an off road bike – typically ordered in conjunction with 61-1049 The Baja Designs XL Mode Wire Set provides a high quality, simple and secure way to dim your lights with a separate switch.
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: 66-0061
