Batteries and Electricals
Showing 25–48 of 50 results
-
Batteries and Electricals
HEX ezCAN OBDII JWPF Adapter cable
HEX ezCAN OBDII JWPF Adapter cable
HEX ezCAN OBDII JWPF Adapter cable This adapter cable is used to connect an ezCAN to an OBD-II port, where the OBD-II port is used as the source for the CAN-bus data.
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: H1-UEH-006 -
Batteries and Electricals
HEX ezCAN PURE Universal Accessory Manager
HEX ezCAN PURE Universal Accessory Manager
HEX ezCAN PURE Universal Accessory Manager + an Optional Plug & Play Harness The HEX ezCAN PURE Universal Accessory Manager is a smart, software-configurable accessory controller, designed for almost any motorcycle with 12V electrics. The HEX ezCAN PURE connects to key signal trigger points — such as high beam, indicators, brake, ignition and horn — and uses these inputs to intelligently control auxiliary lights, horns, heated gear, GPS units and more. With no need to cut into your original wiring, and optional Plug- &- Play harnesses available for select models, the HEX ezCAN PURE offers a clean, seamless and highly customisable way to integrate electronic accessories into your motorcycle. Make your HEX ezCAN PURE installation quicker, cleaner, and easier with the HEX ezCAN Optional Plug & Play Harness
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: HEX ezCAN PURE + Harness -
Batteries and Electricals
HEX ezCAN replacement adaptor – BMW
HEX ezCAN replacement adaptor – BMW
The HEX ezCAN Mojave XDWA9 replacement adapter makes it simple to connect your HEX ezCAN Mojave Accessory Manager to the BMW R1300 vehicle harness. It provides a straightforward plug-in solution so your HEX ezCAN integrates neatly with your bike’s system. DIMENSIONS : 100 × 150 × 20 mm
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: H1-EZS-022 -
Batteries and Electricals
HEX ezSWITCH KIT
HEX ezSWITCH KIT
The HEX ezSWITCH is a compact, handlebar-mounted button with a built-in LED indicator. It’s a versatile smart switch that connects directly to the HEX ezBUS ‘white’ circuit, allowing you to control various accessories connected the user’s same Accessory Manager. The HEX ezSWITCH can be used on any motorcycle model that supports a HEX ezCAN, Denali CANsmart, or Lone Rider MotoCAN Accessory Manager. While most supported motorcycle models already enjoy the convenience of using their standard OE buttons—or the ‘wonder wheel’—to switch auxiliary lights on or off and adjust brightness, riders now have even more flexibility. With the addition of a smart, configurable, illuminated button, you can control your lights with ease, day or night. It’s a great option for those who want a more hands-on or custom setup, adding both style and functionality to your ride. The HEX ezSWITCH also unlocks functionality that was previously out of reach for certain motorcycles. Bikes like the KTM range, Yamaha Ténéré, and others using limited CAN-bus systems have historically lacked rider-accessible control for auxiliary lighting. With the ezSWITCH, these riders can now enable or disable their auxiliary lights, and even adjust light intensity on the fly, opening up new levels of control and riding confidence. The ezSWITCH is also easy to mount, whether on the handlebar or even the side mirror shaft, using a basic cable tie—no complicated tools or setup required! PLUS… The HEX ezSWITCH includes a single expander circuit, accessible via the white 2-pin JWPF connector. This functions like the Red, Blue, or Yellow outputs on the HEX ezCAN, but with two key differences: 2A Max Output – The circuit is protected by HEX’s proprietary fusing algorithm, but the fuse is fixed at 2A. 2-Wire Connection – Unlike the main ezCAN outputs, this does not support 3-wire lights in their 3-wire mode. While this output can be configured for any ezCAN function, it is most commonly used as a brake light output. Each ezSWITCH kit contains: 1x Handle bar switch (with integral cable) 1x ezSWITCH controller 1x 2-wire JWPF stub connector 1x MT – 1xJWPF adapter cable 3x 4.8mm x 200mm Cable ties
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: H1-EZA-010-R -
Batteries and Electricals
Honda Hex EzCan Accessory Manager (Gen 2)
Honda Hex EzCan Accessory Manager (Gen 2)
The ezCAN plugs directly into your motorcycle and listens to the CAN-bus. The best plug and play solution to add accessories to your motorcycle without the need to cut any wires that could void your warranty. This is the latest version of the ezCAN with four high power output channels which have ultimate configuration! Customise your bike and make it safer to ride. NET QUANTITY 1N x ezCAN Device 1N x Micro USB Cable 2N x Velcro Strips 2N x Blanking Plugs 4N x Cable Ties 4N x Two-wire stub connectors (Orange) 4 x Terminal wires (Orange) 4 x Blanking seals
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: H3-HND-002 -
Batteries and Electricals
Husqvarna Hex EzCan Accessory Manager (Gen 2)
Husqvarna Hex EzCan Accessory Manager (Gen 2)
The ezCAN plugs directly into your motorcycle and listens to the CAN-bus. The best plug and play solution to add accessories to your motorcycle without the need to cut any wires that could void your warranty. This is the latest version of the ezCAN with four high power output channels which have ultimate configuration! Customise your bike and make it safer to ride. NET QUANTITY 1N x ezCAN Device 1N x Micro USB Cable 2N x Velcro Strips 2N x Blanking Plugs 4N x Cable Ties 4N x Two-wire stub connectors (Orange) 4 x Terminal wires (Orange) 4 x Blanking seals
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: H3-HNH-002 -
Batteries and Electricals
Mirror Mounted 18W PD USB-C
Mirror Mounted 18W PD USB-C
Waterproof Motorcycle USB Charger 18W PD USB-C Charger for 10mm Rear View Mirror Upgrade your ride with this waterproof motorcycle USB charger, designed with a secure SAE to USB-C adapter for effortless installation on 10mm rear view mirror mounts. This 18W PD USB-C motorcycle charger delivers fast charging for your devices – even on bumpy rides – making it the perfect bike phone charger for motorcycles and scooters. The low-profile, space-efficient build of this motorcycle USB socket ensures a clean and stylish look, while its IP65 waterproof design protects against rain, dust, and debris. With included releasable cable ties, this motorbike USB port offers a tidy wiring solution that keeps your dashboard clutter-free. Compatible with 12V motorcycle systems and supports various devices including phones, GPS, and intercom systems. This motorcycle USB C charger is engineered to minimize cable snagging and interference with controls. Ideal for riders looking for a reliable moto USB charger or 12v USB motorcycle power outlet.
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: TY-A1019 -
Batteries and Electricals
MT 3-Pin Female Connector Set
MT 3-Pin Female Connector Set
The MT 3-Pin Female Connector Set forms part of our ezCAN Spares product collection. These products are “add-on†spares available for use with our HEX ezCAN devices. Description This Female Connector Set contains: 3 x Female Connectors 9 x Terminals 9 x Wire seals You will find this product useful if you are making extension cables between your ezCAN and any accessory that has a MT 3pin male connector
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: H1-EZS-007 -
Batteries and Electricals
MT 3-Pin Male Connector Set
MT 3-Pin Male Connector Set
The MT 3-Pin Male Connector Set forms part of our ezCAN Spares product collection. These products are “add-on†spares available for use with our HEX ezCAN devices. Description This Male Connector Set contains: 3 x Male Connectors 9 x Terminals 9 x Wire seals 3 x Blanking seals You will find this product useful if you are making extension cables for your ezCAN or if you want to attach connectors to any accessory that will plug into any of your ezCAN output channels.
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: H1-EZS-008 -
Batteries and Electricals
MT 3-Pin Male Connector Stub Set
MT 3-Pin Male Connector Stub Set
This MT 3-Pin Male Connector Stub Set forms part of our ezCAN Spares product collection. These products are “add-on†spares available for use with our HEX ezCAN devices. Description This product contains: 2 x Connector Stubs (2-wire pigtails) 2 x terminated wires (control signal for 3-wire loads) 2 x blanking seals Attach these stubs to your accessories to connect your accessories to your ezCAN.
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: H1-EZS-001 -
Batteries and Electricals
Posi Fuse® Connectors
Posi Fuse® Connectors
Posi Fuse® Blade Posi-Fuse Blade fuse holder incorporates the posi-lock no crimp technology with universal fuse coverage. Our unique fuse holder features ATC, ATO and Mini Fuse capacity and connects 12-18 gauge stranded wire directly to fuse holder. Blade Fuseholder All Sizes 4 to 0.75 sq.mm( 12, 14, 16, 18 wire gauges) 2 amp to 30 amp fuses Fuses: ATC/ATO/MINI Length: 58.9 mm Conductor Material: Brass, Tin Plated Body Material: Nylon 66 Temperature Range: -23C to 120C
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: FF1218 -
Batteries and Electricals
Posi Lock® Connector
Posi Lock® Connector
VIBRATION PROOF HIGH TEMP REUSABLE Posi-Lock® Connectors with a cost savings! Posi – Lock covers the majority of uses on a motorcycle like splicing wires together for auxiliary lights, horn relays, LED brake lights, and more. They are reusable, vibration proof and can be used at high temperatures; they meet the SAE standards. The Posi-Lock Connectors make wire splicing a cinch, and the connection the Posi-Lock makes is really solid. You unscrew the two threaded ends from the central connector and insert the wires, screw them back on and you’re done! The central barrel-shaped connector has a metal conductor running through it, and when you screw on the ends, the wire is forced against the metal to make the connection. No metal part 100% Nylon 66 Resistance is 80% Less than crimp connectors Easy and quick to use Lesser chances of loose connection Removable Both Ends Swivel Max Temp 120 deg centigrade Max 600 VAC / DC
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: PL1824 -
Batteries and Electricals
Posi Seal® Connector
Posi Seal® Connector
Posi Seal Connectors deliver superior in-line splices with just hand tightening. These electrical connectors require no crimping and are reusable. VIBRATION PROOF HIGH TEMP REUSABLE Posi-Seal® Connectors are weather tight The Posi-ealSConnectors make wire splicing a cinch, and the connection the Posi-Lock makes is really solid. You unscrew the two threaded ends from the central connector and insert the wires, screw them back on and you’re done! The central barrel-shaped connector has a metal conductor running through it, and when you screw on the ends, the wire is forced against the metal to make the connection. No metal part 100% Nylon 66 Resistance is 80% Less than crimp connectors Easy and quick to use Lesser chances of loose connection Removable Both Ends Swivel Weather tight Max Temp 120 deg centigrade Max 600 VAC / DC – Refer image chart for details
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: PS1800 -
Batteries and Electricals
Posi Tap® Connector
Posi Tap® Connector
Electrical Connector – Posi-Tap® Posi-Tap® connectors allows you to tap into wires without cutting! Total wire integrity is maintained Installs in seconds by hand – No crimping or tools required Reusable or permanent Less resistance Vibration proof Fully insulated Powers up to 4 leads at once! POSI-TAP Connector meet or exceeds: SAEJ1211 Section 3.2.3 Salt Spray Test Section 3.2.4 Immersion & Splash Test Section 3.2.5 Dust, Sand & Gravel Test Section 3.2.7 Mechanical Vibration Section 3.2.8 Mechanical Shock Section 3.2.1 Temperature Test Types Available in Posi-Tap® Line Tap 4 – 6 sq.mm (10-12ga) Accessory lead (12-18 ga) Posi-Tap Installation Instructions Note: Regular Posi-Lock Products install the same way as the small cap of the Posi-Tap. Click here to see how to install a regular Posi-Lock. Note: Larger Posi-Locks require 1/2″ of stripped wire, and smaller ones require 3/8″ of wire to be stripped. These photos show a Posi-Tap 1824, which requires 3/8″ stripped on the tapping wire only. The tapped wire is not stripped. Here is a side view showing the point that pierces the wire for the tap. Remove this large cap and the smaller cap. Start by inserting fully the wire to be tapped as shown in the next photo below. Slide the large cap over the wire as far as it will go. Here, the wire to be tapped is inserted and ready to tap. Here the tap is started carefully onto the threads of the large cap. Make sure the pin is centred on the wire when the pin contacts the wire. Keep the Posi-Tap straight to do this. Continue to thread by hand until the wire is tightly tapped. Now, complete the Posi-Tap install, by stripping and installing the tapping wire, as shown below.
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: EX-350Y -
Batteries and Electricals
Posi Tap® Connector (0.5 – .34sqmm)
Posi Tap® Connector (0.5 – .34sqmm)
Electrical Connector – Posi-Tap® Posi-Tap® connectors allows you to tap into wires without cutting! Total wire integrity is maintained Installs in seconds by hand – No crimping or tools required Reusable or permanent Less resistance Vibration proof Fully insulated Powers up to 4 leads at once! POSI-TAP Connector meet or exceeds: SAEJ1211 Section 3.2.3 Salt Spray Test Section 3.2.4 Immersion & Splash Test Section 3.2.5 Dust, Sand & Gravel Test Section 3.2.7 Mechanical Vibration Section 3.2.8 Mechanical Shock Section 3.2.1 Temperature Test Types Available in Posi-Tap® Line Tap 0.5 to 0.34 sq.mm (20-22 ga) Accessory Lead: 0.75 to 0.25 sq.mm (18-24 ga) Swivel Tapered Type Straight Mini Type Posi-Tap Installation Instructions Note: Regular Posi-Lock Products install the same way as the small cap of the Posi-Tap. Click here to see how to install a regular Posi-Lock. Note: Larger Posi-Locks require 1/2″ of stripped wire, and smaller ones require 3/8″ of wire to be stripped. These photos show a Posi-Tap 1824, which requires 3/8″ stripped on the tapping wire only. The tapped wire is not stripped. Here is a side view showing the point that pierces the wire for the tap. Remove this large cap and the smaller cap. Start by inserting fully the wire to be tapped as shown in the next photo below. Slide the large cap over the wire as far as it will go. Here, the wire to be tapped is inserted and ready to tap. Here the tap is started carefully onto the threads of the large cap. Make sure the pin is centred on the wire when the pin contacts the wire. Keep the Posi-Tap straight to do this. Continue to thread by hand until the wire is tightly tapped. Now, complete the Posi-Tap install, by stripping and installing the tapping wire, as shown below.
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: EX-130RR -
Batteries and Electricals
Posi Tap® Connector (0.75 sqmm)
Posi Tap® Connector (0.75 sqmm)
Electrical Connector – Posi-Tap® Posi-Tap® connectors allows you to tap into wires without cutting! Total wire integrity is maintained Installs in seconds by hand – No crimping or tools required Reusable or permanent Less resistance Vibration proof Fully insulated Powers up to 4 leads at once! POSI-TAP Connector meet or exceeds: SAEJ1211 Section 3.2.3 Salt Spray Test Section 3.2.4 Immersion & Splash Test Section 3.2.5 Dust, Sand & Gravel Test Section 3.2.7 Mechanical Vibration Section 3.2.8 Mechanical Shock Section 3.2.1 Temperature Test Types Available in Posi-Tap® Line Tap 0.75 sq.mm (18 ga) Straight Mini Type Tapered Posi-Tap Installation Instructions Note: Regular Posi-Lock Products install the same way as the small cap of the Posi-Tap. Click here to see how to install a regular Posi-Lock. Note: Larger Posi-Locks require 1/2″ of stripped wire, and smaller ones require 3/8″ of wire to be stripped. These photos show a Posi-Tap 1824, which requires 3/8″ stripped on the tapping wire only. The tapped wire is not stripped.
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: EX-135R -
Batteries and Electricals
Posi Tap® Connector (2.5-1.5sqmm)
Posi Tap® Connector (2.5-1.5sqmm)
Electrical Connector – Posi-Tap® Posi-Tap® connectors allows you to tap into wires without cutting! Total wire integrity is maintained Installs in seconds by hand – No crimping or tools required Reusable or permanent Less resistance Vibration proof Fully insulated Powers up to 4 leads at once! POSI-TAP Connector meet or exceeds: SAEJ1211 Section 3.2.3 Salt Spray Test Section 3.2.4 Immersion & Splash Test Section 3.2.5 Dust, Sand & Gravel Test Section 3.2.7 Mechanical Vibration Section 3.2.8 Mechanical Shock Section 3.2.1 Temperature Test Taps 2.5 – 1.5 sq mm and Accessory lead 0.25-0.75 sq mm Posi-Tap Installation Instructions Note: Regular Posi-Lock Products install the same way as the small cap of the Posi-Tap. Click here to see how to install a regular Posi-Lock. Note: Larger Posi-Locks require 1/2″ of stripped wire, and smaller ones require 3/8″ of wire to be stripped. These photos show a Posi-Tap 1824, which requires 3/8″ stripped on the tapping wire only. The tapped wire is not stripped. Here is a side view showing the point that pierces the wire for the tap. Remove this large cap and the smaller cap. Start by inserting fully the wire to be tapped as shown in the next photo below. Slide the large cap over the wire as far as it will go. Here, the wire to be tapped is inserted and ready to tap. Here the tap is started carefully onto the threads of the large cap. Make sure the pin is centred on the wire when the pin contacts the wire. Keep the Posi-Tap straight to do this. Continue to thread by hand until the wire is tightly tapped. Now, complete the Posi-Tap install, by stripping and installing the tapping wire, as shown below.
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: EX-150B -
Batteries and Electricals
Posi Tap® Connector (4-07.5sqmm)
Posi Tap® Connector (4-07.5sqmm)
Electrical Connector – Posi-Tap® Posi-Tap® connectors allows you to tap into wires without cutting! Total wire integrity is maintained Installs in seconds by hand – No crimping or tools required Reusable or permanent Less resistance Vibration proof Fully insulated Powers up to 4 leads at once! POSI-TAP Connector meet or exceeds: SAEJ1211 Section 3.2.3 Salt Spray Test Section 3.2.4 Immersion & Splash Test Section 3.2.5 Dust, Sand & Gravel Test Section 3.2.7 Mechanical Vibration Section 3.2.8 Mechanical Shock Section 3.2.1 Temperature Test Types Available in Posi-Tap® Line Tap and Accessory Lead: 4 – 0.75 sq.mm (12-18 ga) Posi-Tap Installation Instructions Note: Regular Posi-Lock Products install the same way as the small cap of the Posi-Tap. Click here to see how to install a regular Posi-Lock. Note: Larger Posi-Locks require 1/2″ of stripped wire, and smaller ones require 3/8″ of wire to be stripped. These photos show a Posi-Tap 1824, which requires 3/8″ stripped on the tapping wire only. The tapped wire is not stripped. Here is a side view showing the point that pierces the wire for the tap. Remove this large cap and the smaller cap. Start by inserting fully the wire to be tapped as shown in the next photo below. Slide the large cap over the wire as far as it will go. Here, the wire to be tapped is inserted and ready to tap. Here the tap is started carefully onto the threads of the large cap. Make sure the pin is centred on the wire when the pin contacts the wire. Keep the Posi-Tap straight to do this. Continue to thread by hand until the wire is tightly tapped. Now, complete the Posi-Tap install, by stripping and installing the tapping wire, as shown below.
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: EX255 -
Batteries and Electricals
Posi Tite® Watertight Connector
Posi Tite® Watertight Connector
WATERPROOF VIBRATION PROOF HIGH TEMP REUSABLE Posi-Tite® Connectors with a cost savings! Posi -Tite® covers the majority of uses on a motorcycle like splicing wires together for auxiliary lights, horn relays, LED brake lights, and more. They are reusable, vibration proof and can be used at high temperatures; they meet the SAE standards. The Posi-Tite® Connectors make wire splicing a cinch, and the connection the Posi-Tite makes is really solid. You unscrew the two threaded ends from the central connector and insert the wires, screw them back on and you’re done! The central barrel-shaped connector has a metal conductor running through it, and when you screw on the ends, the wire is forced against the metal to make the connection. Posi-Tite® connectors are reusable, water tight and waterproof. They can safely be used on boats, pumps, outdoor electrical connections, car wiring, trailer wiring, farming equipment, lawn mowers, and more. These connectors far exceed SAE/USCAR-2 5.6.5 Submersion Test where test samples are subject to reuse over one hundred times with continuous submersion. No metal part 100% Nylon 66 Resistance is 80% Less than crimp connectors Easy and quick to use Lesser chances of loose connection Removable Some uses Oxygen Sensors • Military Vehicles • Boats • Marine Equipment • Pumps • Outdoor Lighting • Car Alarms • Locks • Lawnmowers • Farm Equipment • Ceiling Fans • Car Stereos
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: WT1820 -
Batteries and Electricals
Posi Twist® Connector
Posi Twist® Connector
VIBRATION PROOF HIGH TEMP REUSABLE Used for connecting multiple wires together ( no need to solder) When in-line connections are not needed. Posi-Twistâ„¢ Connectors deliver the same superior connection as Posi-Lock® Connectors with a cost savings! Similar function to a screw-on wire connector You can use the bigger diameter Posi-Twist connectors to connect several wires together or multiple gauge wires. No metal part 100% Nylon 66 Resistance is 80% Less than crimp connectors Easy and quick to use Lesser chances of loose connection Removable Reusable
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: PT2026 -
Batteries and Electricals
SAE to 36W PD USB-C + QC 3.0 (CABLED)
SAE to 36W PD USB-C + QC 3.0 (CABLED)
ã€SAE Connector】For motorcycles, solar, and automotive applications. ã€Dual, powerful, smart USB ports】 Both the 18W PD USB-C port and 18W Quick Charge 3.0 USB-A port, allow users to simultaneously charge multiple devices in record time, with a total maximum output of 6A/36W (Input: 12-24V), without overloading and slowing down. Perfect for Android and iOS devices! ã€Super-efficient charge】The 18W PD port charges the latest USB-C devices faster; the USB-A port supports the 18W Quick Charge 3.0 with compatible devices. The charging speed is up to 4X faster than standard chargers. ã€Cable Extension】with 20.4 Inch (52 centimetres) cable wire for further connectivity; Stay Plugged in; Blue LED Indication Light and Water Resistant Weather Cap ã€Safety technology】Certified by RoHS, CE and FCC, USB-IF. The built-in, intelligent multiple protection systems, which protect your devices from over-current, over-charging and over-heating, ensure superior performance, safety and durability.
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: TY-A2029 -
Batteries and Electricals
Surface Panel & Handlebar Cigarette (Plastic)
Surface Panel & Handlebar Cigarette (Plastic)
Ideal for Charging Any Cigarette Lighter Powered Devices, Such As TomTom, Garmin and Some Other Sat Navigation Devices; Designed and Made in Taiwan Becomes a surface mount as well when not used with the handlebar mount! FCC and CE Approval that Features Built-in Safety Fuse and Auto Shutdown System to Protect Against Shorts and Surges. Input DC 12 – 36v Output DC 12v, 15Amp Connector: bullet connectors Universal fits for 12-24V Vehicle, Motorcycle, ATV, Boat, Car or Marine. Easily installation (Screws Included) ! The flush mount socket features a dust proof cover and are suitable for charging devices Material: High Quality ABS Socket Body Please note that depending on the model of your ride a wire connection might be needed from the device to the battery. Wire for that is not included with this device! PLEASE NOTE WATER DAMAGES ARE NOT COVERED SO make sure lid is closed accordingly so that there is no water ingress.
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: TC-6613WB -
Batteries and Electricals
Triumph Hex EzCan Accessory Manager
Triumph Hex EzCan Accessory Manager
The ezCAN plugs directly into your motorcycle and listens to the CAN-bus. The best plug and play solution to add accessories to your motorcycle without the need to cut any wires that could void your warranty. This is the latest version of the ezCAN with four high power output channels which have ultimate configuration! Customise your bike and make it safer to ride. NET QUANTITY 1N x ezCAN Device 1N x Micro USB Cable 2N x Velcro Strips 2N x Blanking Plugs 4N x Cable Ties 4N x Two-wire stub connectors (Orange) 4 x Terminal wires (Orange) 4 x Blanking seals
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: H3-TRI-002 -
Batteries and Electricals
Universal Splitter Cable
Universal Splitter Cable
Universal Splitter Cable: Description: The Universal splitter fits inline between the ezCAN and the CAN-bus connector allowing a second ezCAN to be connected for a daisy-chain connection. This splitter cable is compatible with the following ezCAN devices: ezCAN Daytona for Harley Davidson ezCAN Laconia for Harley Davidson ezCAN Sahara for Honda ezCAN Scandes for Husqvarna ezCAN Gobi for KTM ezCAN Tagus for Triumph
Key Features
- High-quality construction
- Durable
- Easy installation
SKU: H1-UEA-001
