Wunderlich

BMW Protection – Caliper Brake Guard (Rear)

Brake Caliper Cover Rear : The brake calipers are transformed by this elaborately made cover into real eye-catchers as well as benefiting from additional protection. The beautifully machined part not only makes that area of the forks look cleaner and nicer, it also adds protection to the brake caliper at the rear. Made of strong billet aluminium. Easy to install. Complete with all installation parts. Made in Germany. MANUAL VIDEO

Key Features

• High-quality construction
• Durable
• Easy installation

BMW Protection – clutch and alternator Cover (Set)

Fits to – S 1000 XR (2020-) S 1000 R (2021-) M 1000 R (2023-) M 1000 RR (2021-2022) S 1000 RR (2019-) This set consists of two robust protectors that offer reliable protection for the critical areas on the left and right of the engine: the exposed covers for the clutch and alternator. Both of the original engine covers have a rather complicated design and would be vulnerable in the case of an unfortunate fall or crash. Any damage is annoying, however a break or grinding through could possibly prevent onward travel or even cause total engine failure on the high-performance engine on your BMW. The engine protective cover is constructed of custom-fit, shock-resistant, lightweight special plastic and is additionally reinforced with an integrated, deep-drawn stainless steel insert to protect your BMW. The complete protectors have been constructed by our developers in such a way that mechanical stresses, force and torque peaks are distributed and dissipated uniformly over the entire component structure. Additional damping is provided by a moulded elastomer element made of a highly heat-resistant material that is fitted to the inside. It is both supportive and protective and is sized to be shock absorbing in terms of its Shore hardness*. The high-quality design and the function of the cover is rounded off by an integrated deep-drawn stainless steel insert. In the worst case scenario, it acts as a robust protection against wear, to avoid grinding through the cover and the mechanical damages or loss of oil that this inevitably entails. Thus, the cover reduces the risk of expensive secondary damages. In many instances, they let you carry on riding after the mishap. The engine protective cover is characterised by its integrated, sporty design that reliably protects vulnerable areas and simultaneously accentuates the design of the casing cover. The covers can be fitted using the mounting kit provided in just a few minutes. With lasered Wunderlich brand logo. The facts Engine protective cover for covering the clutch and alternator on a high-performance engine Reduces the risk of expensive secondary damages after a motorcycle falling, slipping or any other unforeseen mechanical stresses Made of durable, impact-resistant special plastic Reinforced with a structurally integrated stainless steel insert, which acts as robust protection against wear for the original clutch and alternator casing covers Uniform distribution and dissipation of external mechanical stresses, force and torque peaks across the component structure Additional shock absorbing damping thanks to a moulded elastomer with resistance to high temperatures that is supportive and protective Integrated, functional design that matches perfectly with sporty automotive design With lasered Wunderlich brand logo. Easy and fast installation with the mounting kit provided Specifications Material High-quality, impact-resistant special plastic, precision manufactured with integrated shock-absorbing elements Stainless steel, precisely deep-drawn in a die, carefully finished, lasered logo Colour Black Your Wunderlich benefits Wunderlich premium product. Small series. Hand crafted. Wunderlich design. Integrated and functional. Made by Wunderlich

Key Features

• High-quality construction
• Durable
• Easy installation

BMW Protection – Paralever Guard

ParaLever Guard – Black : The ideal protection for the ParaLever final drive! This clever protection bar attaches to the bottom of the final drive housing and effectively protects the final drive and ParaLever pivot from damage, should the asphalt come closer than desired. The LeverGuard prevents damage to the aluminum housing and in extreme cases, it can even prevent leakage caused by damage to the radial seal. The LeverGuard costs only a fraction of what repairs would add up to if this part of your bike were to be damaged. Installation is easy and it requires absolutely no changes or modifications to the motorcycle. The LeverGuard will leave no trace of ever having been installed and it can be seamlessly removed at any time. A CNC Machined clamping piece permits this easy and sturdy attachment. In contrast to other crash pads available, the LeverGuard elegantly follows the inherent lines of the ParaLever and becomes an unobtrusive and discreet accent. Form and function of the LeverGuard differ however: The part is very strong and effective at absorbing energy due to its hybrid construction of an elastic steel core and thick polymer coating. The LeverGuard provides added protection both on road and off road and even in extreme lean angles, it will not reduce cornering clearance. Fits all R1200 models with Paralever (not R1200 C / CL) and HP2 Enduro. *Not compatible with the original BMW final drive protector of the Megamoto. MANUAL

Key Features

• High-quality construction
• Durable
• Easy installation

BMW Protection – Radiator Guard

Fits To – S 1000 XR (2020-) S 1000 R (2021-) M 1000 R (2023-) does not fit with optional M Competition Package M 1000 RR (2021-2022) S 1000 RR (2019-) The radiator is optimally positioned in the airstream generated during travel for optimum airflow to cool the engine. The exposed installation position also means that the delicate fins of the radiation network are also unprotected against stone strikes, foreign bodies and insects, however. Insects clog up the cooler and reduce the cooling capacity, such as fins bent by „stone impacts“. In the worst case, this can lead to leaks. With a damaged cooler, it is no longer possible to continue driving and dirt reduces the cooling capacity. Our radiator protection is designed to provide an optimal air flow and optimal cooling capacity. The front silhouette of the cooler is covered in a way that reliably avoids foreign bodies and insects directly striking the vulnerable radiator network. It reliably protects the cooler without impacting the air flow. Our radiator protection is also a visual highlight: The functional design is integrated into the appearance and visibly enhances it. The facts: Function Refined, reliable protection of the vulnerable radiator network for the radiator Prevents damage and heavy dirt or foreign bodies being thrown up Prevents the loss of cooling in the radiator without reducing the air flow Highly solid, resistant welded stainless steel grille with sturdy aluminium frame bonding Vibration-isolated mounting Robust connection technology between grille and frame With mounting kit Technical information: Grille material: Stainless steel grille, carefully welded and crafted to be highly resistant Material: Aluminium, high-quality, 2 mm profile thickness, black anodised Component dimensions Width: 425 mm Height: 286 mm Features Wunderlich premium product. Small series. Hand crafted. Wunderlich design. Integrated and functional. Wunderlich product category Protection Design Tip:If you want to carefully clean the cooler by hand, this must be done with extreme care to ensure that the radiator network doesn’t get damaged. Insects and other grime which has accumulated can be easily removed with a damp cloth. Place the damp cloth on the grille until the dirt is loosened by the moisture and can be easily wiped away with no residue.

Key Features

• High-quality construction
• Durable
• Easy installation

BMW R & C Protection – Slider Axle (Front)

Crash Protectors – Black : Axis-protection pads DoubleShock Keep the top yoke at a safe distance from the tar and prevent sustainably from enormous damage. Effective protection of the top yoke. Ideal combination of crash bar/ -pads, because the bike is now also protected by the axis pads. li> Double protection against impact and sliding damage (thanks to the integrated damping layer). Racing design for small friction resistance / shear forces at minor crashes or heavy lean angles and a progressively increasing frictional resistance with prolonged road contact. High strength special plastic. Safe and easy handling. li> Fast and easy mounting. Inclusive complete fitting kit. Made in Germany. Fitting Instructions VIDEO VIDEO

Key Features

• High-quality construction
• Durable
• Easy installation

BMW R & S Protection – ABS Sensor Guard

ABS-Sensor Protection : Wunderlich ABS sensor protection The ABS sensor is a sensitive component and is pretty exposed on the front wheel. A stone or branch thrown up can quickly damage or even completely destroy the sensor, which can result in extremely costly repairs. This ABS sensor cover closes the gap between the brake calliper and the front wheel bearings and prevents damage or the ABS sensor being ripped off. Small investment – big usefulness! Anodised aluminium Simple assembly Perfect fit and form-fitting Reliable protection and secure hold Available in a choice of silver or black Supplied complete with all attachment hardware Instruction Manual

Key Features

• High-quality construction
• Durable
• Easy installation

BMW R 12 Ergonomics – ERGO+ Handlebar Risers 41mm

WUNDERLICH HANDLEBAR RISER ERGO+ – RELAXED ON THE GO, THANKS TO PERFECT HANDLEBAR ERGONOMICS AND VISIBILITY Features and Product Characteristics Raises the handlebar base by approximately 41 mm and moves it 27 mm closer to the rider Relaxed, upright seating position for fatigue-free riding Noticeable increase in comfort by relieving the entire musculoskeletal system Better handling combined with improved visibility and control More direct riding feel Enhances passive safety The handlebar’s tilt options remain fully functional, allowing for optimal adjustment to individual needs and noticeable improvement in riding position The ERGO+ handlebar riser is made from high-strength aluminium precision casting, which also impresses aesthetically The texture of the surface and the colour match those of the upper fork bridge and the clamps Silver anodised With ABE Includes mounting kit Technical Data Material High-strength aluminium, precision-cast, silver anodised Dimensions Rise: 41 mm Shift towards the rider: 27 mm Colour Silver Your Wunderlich Advantages Wunderlich product. Small series. Handmade. Wunderlich design. Functional and integrated. WUNDERLICH HANDLEBAR RISER ERGO+ COMBINES RAISING THE HANDLEBARS WITH SHIFTING THE HANDLEBAR BASE CLOSER TO THE RIDER Our developers have specially designed the handlebar riser to combine raising the handlebars with shifting the base closer to the rider. The ergonomic effects are significant, as they relax the entire back muscles and arms, while also relieving the spine, pelvis, and coccyx. This greatly enhances touring suitability and comfort. Moreover, relaxed riding improves passive safety and provides better visibility of traffic, thanks to the more upright seating position. The ERGO+ handlebar riser consists of meticulously crafted precision-cast parts made from high-strength aluminium, which also shine aesthetically and become a visual highlight. The texture of the surface and colour match those of the upper fork bridge and clamps. We have also paid great attention to the form design, ensuring the upper fork bridge, handlebar risers, and handlebars appear as one piece.

Key Features

• High-quality construction
• Durable
• Easy installation

BMW R 12 G/S Protection – Exhaust Protector

PROVEN IN TOUGH OFF-ROAD CONDITIONS – WUNDERLICH EXHAUST PROTECTOR Function and product features Ingenious protector for the standard exhaust silencer Seamlessly integrated design Generous material thickness for maximum protection Stainless steel inlay for added stability Heat-resistant Proven effective in demanding motocross use Easy installation – simply slide it on Precisely positionable Secure fit Technical data Material Injection-moulded silicone elastomer with form-fitting stainless steel inlay Your Wunderlich advantages Wunderlich product. Wunderlich design. Functional and integrated. WUNDERLICH EXHAUST PROTECTOR – BLACK FOR THE SILENCER: INGENIOUS PROTECTOR WITH SEAMLESS DESIGN INTEGRATION This protector shields the standard exhaust silencer of your BMW R 12 G/S in the event of a tip-over or slide. Two dynamically positioned polygonal cut-outs complete the integrated design. We’ve ensured a robust construction and generous material thickness so that, in the event of an incident, the protector keeps the silencer safely distanced from the ground for optimal protection. The protector is extremely easy to install. It’s made of heat-resistant silicone elastomer reinforced with a stainless steel inlay. This allows it to be simply slid over the end cap of the silencer like a band and precisely positioned without tools. The material properties ensure that the friction between silencer and protector keeps it securely in place once mounted. Protectors of this type have proven themselves in tough motocross conditions – that’s what inspired us to develop one for the BMW R 12 G/S.

Key Features

• High-quality construction
• Durable
• Easy installation